Jiangsu Gaoyi Electric Technology Co.,Ltd |
|
Immersion Heater Industrial Steam Generator 20mm - 12m customizable
Product Description
Introduction:
1. This Industrial electric immersion flange heater for
steam/biomass boiler is widely used in air, water, oil, acid and
alkaline liquids, and can be effectively adapted to various
environments, such as air separation equipment, metallurgy , high
temperature runners, medical equipment, environmental protection
equipment, sewage treatment systems, heating systems, etc.
2. This Industrial electric immersion flange heater for
steam/biomass boiler produced by our company have sufficient
bearing capacity and superior service life under strong use
intensity and harsh environment.
Application:
•Hot Water Storage Tanks • Heat transfer system
•Warming Equipment •Porcess air equipment
•Preheating all •Boil equipment
•Cleaning and rinsing tanks • Freeze Protection of Any Fluid
Basic parameter :
Product name | Industrial electric immersion flange heater for steam/biomass
boiler |
Power | 0-90000KW(explosion-proof up to 2000KW) |
Voltage | 12V-1000V(customized ) |
Usage temperature | -200℃-+850℃ |
Thermal transforming | 99.99% |
Leakproof Structure | Thread, Flange, Chuck ,etc |
Lift time | 10000-60000H |
Useable medium | Gas/water/oil/fluid |
Immersion heater basic selection table refer to the follows :
Oil fluid type | Model | Pipe material | MgO | life time | Pipe load |
Commercial &Civil | LDF-O(M) | Welding stainless steel | China | ≥7200H | 0.7 w/cm²(still oil) |
1.5 w/cm²(high quality oil) | |||||
2.4 w/cm²(conduction oil) | |||||
3.5 w/cm(fuel oil) | |||||
Economy type | LDF-O(C) | 304/321 seamless stainless steel | Japan (TATEHO) | ≥20000H | 0.7 w/cm²(still oil) |
1.5 w/cm²(high quality oil) | |||||
2.4 w/cm²(conduction oil) | |||||
3.5 w/cm(fuel oil) | |||||
High performance | LDF-O(H) | 304 stainless steel | Japan (TATEHO) | ≥50000H | 0.7 w/cm²(still oil) |
1.5 w/cm²(high quality oil) | |||||
2.4 w/cm²(conduction oil) | |||||
3.5 w/cm(fuel oil) |