CNC Metal Cutting Band Sawing Machine , Metal Bandsaw Machine Large Feed Cutting

Full Automatic Cnc Metal Cutting Blade Sawing Band Saw Machine

Oil-based cutting fluid can be considered for the following situations:

1. When the tool's durability has a large proportion to the cutting economy (such as the tool's high price, long loading and unloading auxiliary time, etc.).

2. The machine has high precision and no water is allowed to mix with it (to avoid corrosion).

3, machine tool lubrication system and cooling system easy to collude with the occasion, and do not have waste liquid treatment equipment and conditions of the occasion.

Jiapu cutting fluid recommended: under the following circumstances can be considered to choose water-based cutting fluid:

1, high speed and large feed cutting, so that the cutting area beyond the high temperature, smoke, fire danger occasions.

2, from the process before and after the process, the need to use water-based cutting fluid occasions.

3, hope to reduce the oil splashing and oil mist and diffusion surface caused by pollution and dirt around the machine, so as to keep the operating environment clean occasions.

4, from the price point of view, for some easy machining materials and workpiece surface quality requirements are not high cutting, the use of general water-based cutting fluid can meet the requirements, and can greatly reduce the cost of cutting fluid occasions.
Cutting fluid is used to reduce friction and remove heat.
The aluminium alloy door and window industry usually USES kerosene or saponification fluid.

Microcutting fluid (MQL) has the advantages of high lubrication efficiency, longer tool life, no pollution to the machine and the environment, and no harm to the operator's body compared with the above two media.

Compared with other microcutting liquid phase, UNICUT microcutting fluid has the advantages of high oil film load energy (increased by 5 times) and greatly enhanced oil film stiffness (about 30 times).

1. Operation and maintenance personnel of band sawing machine must undergo professional training to master operation and maintenance skills of band sawing machine.
Operators should ensure adequate sleep and maintain concentration.
2. When changing speed, stop first and then open the shield. Turn the handle to loosen the belt.
3, chip removal wire brush adjustment should make the wire contact with the teeth of the band saw blade, but not more than the root of the teeth, pay attention to observe whether the wire brush can remove iron filings.
4. Adjust the guide arm along the dovetail guide rail according to the size of the processed workpiece. After the adjustment, the guide device must be locked.
5, the maximum diameter of the saw shall not exceed the provisions, the workpiece must be firmly clamped.