Active Member
|
[China]
Address: Room 905, Building A of One World Business Center, Cangzhou, Hebei, China.
Contact name:Lemon
SHEAN (CANGZHOU) CORP LTD |
|
|
Elbow Cold Forming Machine Make Pipe Fitting Mould Die Elbow Mould And Mandel
Our Elbow Cold Forming Machine Make Pipe Fitting Mould Die Elbow Mould And Mandel and elbow mandrel head materials are generally ZG1Cr18Ni9Ti, ZG3Cr20Ni14, ZG1Cr25Ni20Si2, ZG0Cr20Ni25, etc., the high temperature strength and wear resistance have gradually increased, and the price has also increased accordingly.
Pushed elbow mandrel head is divided into single curvature, double curvature and multiple curvature according to the radius of curvature.
For single-curvature, double-curvature, and multi-curvature mandrels, the thrust force is gradually reduced, and the production cost is gradually increased. According to the cross-sectional shape, it is divided into two types: circular cross section and elliptical cross section. The circular cross section is simple to make and the cost is low, but the ellipticity and thinning rate of the elbow are too large. Different, the ellipse and thinning rate of the push elbow are small.
Heiyan chose a mandrel with an oval cross section. According to whether or not there is a shaping section, it is divided into a mandrel head with a shaping section and a mandrel head without a shaping section. The Elbow Cold Forming Machine Make Pipe Fitting Mould Die Elbow Mould And Mandel mandrel with shaped section is complicated to manufacture, high cost and long use time; the mandrel without shaped section is simple to manufacture and low cost.
| Parts Specifications of Our Pipe Expanding and Pipe Fitiings Mould | |
| Material | 2520 ,2014, 304,45# steel ,40# steel,47# steel |
| Size | 27mm ,33mm ,42mm ,48mm ,60mm,73mm,89mm ,102mm ,114mm,141mm ,168mm,219mm,273mm,324mm,356mm ,406mm ,457mm ,508mm ,559mm ,610mm ,660mm ,711mm ,762mm,813mm ,864mm ,914mm ,926mm ,1016mm ,1067mm ,1118mm ,1168mm ,1219mm |
| Pipe Fitiings Mould Type | Elbow Mould Die ,Tee Mould Die ,Cap Mould Die, Reducer Mould Die ,Pipe expanding Mould Die |
We Supply Elbow Cold Forming Machine Make Pipe Fitting Mould Die Elbow Mould
And Mandel and all kinds of corresponding molds and dies for all our Pipe fittings
Machine. The mandrel and corresponding induction coil for elbow
forming machine. The mandrel is mainly engineered from 18-8, 2520,
K18, stainless steel and alloy steel. It allows for production of
pipe elbows with diameter between 21 and 1,620mm, curvature radius
of 1D-3D, and wall thickness of 5-80 mm.
The mandrel for Elbow Cold Forming Machine Make Pipe Fitting Mould Die Elbow Mould
And Mandel comes with an ox horn shape, and is necessary during the hot
forming process. Due to the special shape design, it enables
diameter expanding while creating the bending.
And the mandrel and Elbow Cold Forming Machine Make Pipe Fitting Mould Die Elbow Mould And Mandel material used in our factory has the characteristics of wear resistance, bending resistance and strong impact resistance, and the surface is bright and clean, suitable for the extrusion of copper, iron, aluminum, zinc, stainless steel and other metals.
Advantage of Elbow Cold Forming Machine Make Pipe Fitting Mould Die Elbow Mould And Mandel are as follows:
*High hardness and abrasion resistance surpasses the die steel, and
does not strain the surface of the machined part.
*Compared with steel molds, it has good thermal conductivity and
does not stick to molds, which can ensure uniform mold *temperature
distribution during work, will not cause mold cracks due to local
high temperature, and will not cause cold sweat, *exfoliation, and
wrinkles in stretched products. phenomenon.
*Economic and practical, long life of core rod material.
*The core rod material processing technology is simple. Compared
with steel molds, no direct heat treatment is required for direct
polishing. Therefore, the heat treatment cost is reduced, the mold
processing time is shortened, and the number of stretching times
can be reduced and the cost of the mold can be reduced.
