|
[China]
Trade Verify
Address: Room 903, Tower B, Qiuyi Road 58, Binjiang Dist., Hangzhou City, 310000, China
Contact name:admin
Hangzhou Ecoographix Digital Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Agfa Graphic Art Imagesetter Film For Offset Printing
Model: ECOO-TDS
Brief introduction:
Recording film were the standard in the printing business for
years. Your company still has the option to continue using them. We
offer Agfa original film produced in Belgium and recutted and
repackaged in Shanghai Agfa branch.
It is featureing with open-system, high-speed, red-sensitive film
with hard dot image quality, intended for exposure in image setters
with HeNe laser (630nm-670nm) or red laser diode. Perfect
processing in compatible chemistries.
Specification:
| Model | ECOO-TDS | |
| Plate Type | Alliance far red film | |
| Spectral Sensitivity | HeNe laser and red laser diode (630-670nm) | |
| Description | Emulsion coated on a 0.10 mm antistatic polyester base | |
| Practical Photographic Properities with different engine | ||
| Engine | Accuset | Avantra |
| Int. Setting | 170 | 230 |
| Practical Density | D.4.00-4.20 | D.4.10-4.30 |
| 5% | 5% | 5% |
| 50% | 57% | 53% |
| 95% | 98% | 96% |
| Developer | Agfa developers | |
| Processing time | 20-40 sec | |
| Processing temperature | 35ºC or 95ºF | |
| Developer Replenishment (eg, ACD/ASD) | 15% exposure | 50ml/m² |
| 50% exposure | 150ml/m² | |
| 85% exposure | 250ml/m² | |
| Anti-OX replenishment | 1000 ml/24h=0.264 US gallons/24h | |
| Fixer | Agfa fixer | |
| Fixing temperature | 32ºC or 90ºF | |
| Fixer replenishment (Without Fixer electrolysis) | 15% exposure | 500 ml/m² |
| 50% exposure | 300ml/m² | |
| 85% exposure | 100ml/m² | |
| Fixer replenishment with Fixer electrolysis | 125 ml/m² | |
| Practical set-up density | D 4.00-D.4.20 (dot gain depending on optical quality of imagesetter) | |
| Chemical Compatibility | Processable in all rapid access chemistries and in main hard dot chemistries such as RA2000, Fuji HQ QRD-1 AND QRD-1P | |
| Dimensional Stability | Humidity coef: 0.10mm base, Crh 0.016mm/m/%RH Temp. coef: 0.10mm base, Cot 0.018mm/m/1ºC | |
| Safe light | Dark Green, recommended: Encapsulite T20/ND.75 or equivalent | |
| Storage | The films are preferably stored in a cool dry place temperature below 20ºC and a relative humidity between 30% and 60% | |
Features:
Excellent image quality : very good sharpness and high practical
density
Very wide System latitude: Wide processing & exposure latitude
Very good Day to day consistency Very good batch-to-batch
consistency
Convenience and ease of use because of available ECO equipment
Ecological & Economical replenishment, very Low chemistry
consumption.
Linear output for conventional screening Approved for stochastic
screening
Anti-static before and after processing
Open system : perfect processing in compatible chemistries
Sizes:
390mmX60m 610mmX60m
406mmX60m 660mmX60m
457mmX60m 813mmX60m
508mmX60m 838mmX60m
558mmX60m 914mmX60m
Other sizes are also available as required.
Unpacking:
The film for daylight loading can be loaded in the special cassette
of laser image output machine under daylight.
The film for darkroom loading should be loaded in the special
cassette of laser image output machine under special dark green
light or under totally dark.
Be careful when operating in order to prevent film damaged from
friction, folding, oil and fingerprint.
Storage:
Store the films in a cool and dry place. Storage temperature is not
higher than 20°C and RH no more than 65%. Being too warm and humid
will shorten the films shelf life. Avoid radiation or corrosion of
other substances and sunshine.
