Home Companies Hangzhou Ecoographix Digital Technology Co., Ltd.

High Speed 9000 Sheets/Hour Automatic Overall and Spot UV Coating Machine

Contact Us

[China]

Trade Verify

Address: Room 903, Tower B, Qiuyi Road 58, Binjiang Dist., Hangzhou City, 310000, China

Contact name:admin

Hangzhou Ecoographix Digital Technology Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

High Speed 9000 Sheets/Hour Automatic Overall and Spot UV Coating Machine

Country/Region	china
City & Province	hangzhou zhejiang
Categories	Manufacturing & Processing Machinery Processing Services

Product Details

High Speed UV Spot and Overall Varnish Coating Machine

Model: Ecoo SD-1060W

Product Description

Introduction:

The High Speed UV Spot and Overall Coating machine SD1060W adopts upper-sway gripper-pass-sheet method to enable max speed up to 9500 sheets/hour. UV curing system with Teflon conveying belt has characteristic of higher speed, precise orientation and UV curing higher efficiency and lower power consumption. It is used for both thick and thin papers, and can be used for both full and partial UV varnish coating or water based varnish coating.

Application:

Specification

Model	Ecoo SD-1060W
Max.sheet size	730x1060mm
MIN.sheet size	310X406mm
Max.coating size	720x1050mm
Sheet thickness	80-500gsm
Max Coating Thickness	0.025mm
Coating Media	Water Base Varnish or UV Varnish
Coating registration accuracy	±0.2mm
Production speed	9000 sheets/hour
Weight	8 Ton
Dimension	10460x2725x1930mm
Power	Max 44KW

Floor Plan:

Coating with Anilox Roller:

Coating with Rubber roller:

No.	Name of machine	Name of material	A Cylinder ex. Diameter	B Cylinder length
1	Impression roller	Fine grinding	Ф 310mm	1116mm
2	Plate or Blanket Rubber roller	Fine grinding	Ф 305.2mm	1110mm
3	Coating material roller	U.V rubber coated	Ф 165.3mm	1100mm
4	Chromed roller	Surface chromed	Ф124mm	1118mm

*Anilox roller is suitable for some high precision UV coatings, but different varnish thickness needs different lines of anilox roller.
* Rubber roller is suitable for different varnish thickness,varnish volume can be adjusted by the pressure between the rollers and metering of speed.
It can do the varnish thickness up to 7g/m²

Rubber roller for example
U.V Roller (Full) coating

1. Clamp and lock both ends of the rubber blanket.

2. Prepare a piece of paper (thickness: 0.5mm) or transparent film for under spacing paper.

3. Hang one end of the rubber roller on the blanket clamp and flatten the rubber blanket.

4. According to Inching, load the paper and hang another end of the rubber blanket onto the other end of the clamp.

U.V. Spot Coating

1. After the positioning by front lays and side lays, the middle pass gripper catch and relay the paper into the paper gripping mouth, and bring them into the pressure roller and the rubber roller for impression by which the pasted U.V. varnish on the plate will be coated on the paper surface which will be spot coated.

2. Prepare the paper sheet or transparent film with 0.5mm in thickness for the use of transfer bottom board.

3. Lock the two ends of bottom board on the clamped board tightly.

4. Draw a straight basic line parallelly at the distance of 40 mm from position C on the bottom board. When the bottom board is hung on the rubber roller, this line should be on the same line of the folded line of the rubber roller.

5. Take out a piece of paper to be coated, make an arrangement of size of the to-be-coated part. Put the positive surface of the to-be-coated paper on the working table, cut the part of the to-be-coated paper, and then put the negative surface of the to-be-coated paper on the bottom board.( At this time, the front side of paper should be on the same line of the basic line or forded line), draw the outline of the to-be-coated part on the bottom board.

6. According to the cut part for coating of the paper, make a rubber blanket of the same size or flexo plate which will be stuck to the outlined bottom board with double-face glues.

7. Lock the bottom plate to the rubber roller and run the rubber roller by inching to make another side of the bottom plate to another clamp of rubber roller. Move the offset shaft with a wrench to the top position and gripper both sides of the bottom plate and make bottom plate stick to the rubber roller tightly.

8. The size of the rubber blanket: (perimeter) 820 x 1060mm(width)
9. Anilox Lines and Varnish Volume

Producing And Packaging

Installations worldwide

About our technology and strength, most of our technicians (and the owner) are from Tsai Yi of Taiwan, which was the leading manufacturer of the packaging machines, including the coating machine, flute lamination machine, die cutter and so on, they have more than 30years' technical skill and experience, and pay highly importance on the machine quality.
There are hundreds of the varnish coating machines installed worldwide, about 60sets in China, 60sets in Thailand, Netherlands, Greece, Turkey, Egypt, Peru, Mexico, Colombia and many in other countries, too.

Hot Products

Single Layer Ctcp UV CTP Plate Factory Conventional Convenient for Offset Printing

Contact Us

Hangzhou Ecoographix Digital Technology Co., Ltd.

High Speed 9000 Sheets/Hour Automatic Overall and Spot UV Coating Machine

Product Details

Hot Products

Single Layer Ctcp UV CTP Plate Factory Conventional Convenient for Offset Printing

Low Chemistry CTP Offset Printing Plate Eco Friendly 405nm

ECOO-G Processless Thermal Plates The Eco-Friendly Solution for On-Press Printing

ECOO-G Processless Thermal Plates The Eco Friendly Solution For On Press Printing

ECOO-G Thermal Negative Plate For High Grade Commercial Newspaper And Package Printing

Non Ablation UV Negative CTP Printing Plates for Commercial and Newspaper Printing