|
[China]
Trade Verify
Address: Room 903, Tower B, Qiuyi Road 58, Binjiang Dist., Hangzhou City, 310000, China
Contact name:admin
Hangzhou Ecoographix Digital Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Photopolymer Violet Plate -
Ecoo-V
Introduction
High Quality Photopolymer Plate Designed for Commercial Printers.
It combines fast, accurate and wide-latitude plate exposure with simple processing and robustness.
ECOO-V photopolymer technology sets new standards for violet laser imaging.
Application
Model ECOO-V
Plate Type Low chemistry violet plate, negative printing
Application Newspaper Printing
Substrate Electro chemically Grained and Anodized Aluminum
Gauge 0.20, 0.40(mm)
Maximum short grain width Maximum width 1320 mm
Developer Developing gum
Length of Run Unbaked: 200,000 impressions;
Baked: 500,000 impressions(dependent upon image resolution, press,
press chemical, ink and paper conditions)
Plate setters Capability
All the main brands violet CTP in market, laser power no less than
30 mw
Aluminum Standard 1050 Alloy
Exposure energy 50-60 μj/ cm²(based on plate setter and developing condition)
Developing time 20±3 sec Developing Temperature 28±2ºC
Spectral Sensitivity 405 nm
Resolution 150lpi (2-98%), under1800dpi, 25μm line can be produced.
Preheat 95-121ºC Brush Speed 100 rpm
Shelf life 12 months under recommended storage conditions
Storage and handling
Store plates flat in their packaging, away from excessive cold,
heat or high humidity.
Recommended condition is: temperature 15-28ºC and RH between
30-70%;
Handle with care, the maximum height is 1.2m'
Open the box under yellow light. Sealed the box with remained plate
to avoid moisture.
| Plate Type | ECOO-V |
| Features | Negative-working, low-chemical violet plate, also can work as normal violet plate |
| Application | Newspaper/Commercial Printing |
| Substrate | Electrochemically grained and anodized aluminum substrate |
| Gauge | 0.20/0.25/0.30mm |
| Plate-setter | Existing mainstream 405nm violet plate-setter, All the main brands in market, like Agfa/FFEI&FUJI/ Krause/ECRM/Highwater/Escher-Grad/Dotline |
| Processor | Existing conventional violet processors and low-chemical violet
processors. Recommended: Glunz&Jensen Raptor, Height inca/maya etc. |
| Developer | FUJI LP. DWS. Agfa PL. 10. IMAF NEGA 910; PVD gum |
| Processing | Preheat temp setting 90- 100C (plate surface temp) For FUJI LP-DWS: Developer temperature 25-26C/Dwell time 16-17 seconds For Agfa PL- 10 Developer temperature 24C/Dwell time 17 seconds |
| Run Length | More than 150,000 impressions. Actual run length may vary according to press/paper/ink conditions |
| Laser energy | 70-80 μj/cm² |
| Resolution | 3% to 97% @ 175 lpi under calibration |
| Safe light | For manual handling and platesetting loading, darkroom conditions with G10 safelight is required. |
| Shelf life | 12months under recommended storage conditions |
| Storage | Temperature: 18-26C Relative humidity: 30-70% RH |
| Advantages | Environment-friendly------help enterprises to develop Stable developing performance, compatible with various kinds of developers Reduce equipment investment and maintenance cost |
Workflow
Packing and Producing
FAQ
Q1: Can I get the sample?
A: We are very glad to provide some sample for you to test. We
usually provide 5-15pieces plates for free,but sincerely hope to
get your kind support for the air courier freight. This cost can be returned to you in your first order.
Q2: What is the cost for the CTP plate sample freight?
A: The Air freight depends on the packing size and weight, and the
delivery destination. Or you can arrange the Pick-up service from
your local agent.
Q3: How long can the sample be ready?
A: It usually takes about 3days to prepare the sample.
Q4: Can I visit your factory?
A: You are warmly welcomed to visit our factory! Our company is in
Hangzhou city,which is about 1.5 hour by train from Shanghai.
Q5: How many Square Meters CTP plates can feed one 20' container?
A: About 20000-25000SQM
Q6: Can I take my own brand and label on the packing?
A: Yes, we can provide the OEM with the customer's brand and label.
