Active Member
|
Address: No.11, North of Kaiyuan Road, High-tech Zone, Jining City,Shandong Province, China
Phone: 86-537-2350961
Contact name:Mr. elena
Shandong China Coal Group |
|
|
chinacoal05
Product Introduction
*Automated gain,Peak Hold and Peak Memory;
*Automated display precise flaw location(Depth d,level p,distance s,amplitude,sz dB,);
*Ten independence setup, any criterion can be input freely, we can work in the scene without test block;
*Big memory of 300 A graph and 30000 thickness value.
*Gate and DAC alarm;Acoustic-Optical alarm;
*RS232 port,communication with pc is easy;
*The embeded software can be online updated;
*Li battery, continue working time up to 7 hours;
*Other assistant function;
*Display freeze;
*Automated echo degree;
*Angles and K-value;
*Lock and unlock function of system parameters;
*Dormancy and screen savers;
*Electronic clock calendar ;
*Two gates setting and alarm indication;
*High-speed capture and very low noise;
*DAC,AVG; Solid metal housing (IP65);
*Provides high contrast viewing of the waveform from bright, direct sunlight to completae darkness and easy to read from all angles;
*Powerful pc software and reports can be export to excel;
Main Parameter
Designation | Technical Data |
Range of scanning (mm) | Range of scanning (mm):2.5~60000(Steel Longitudinal wave) |
D-delay (ms) | D-delay (ms):-20~+3400 Steps: -20,-10,0.0, 10, 20, 50,100,150,200,250,300,350,400,450,500, 600, 700,800,900,1000,1500,2000,2500,3000,3400. Adjusting steps: 0.1(-20ms~999.9ms),1(1000ms~3400ms) |
P-delay (ms) | P-delay:0.0~99.99 Adjusting steps: 0.01 |
MTLVEL(m/s) | MTLVEL:1000~9999 7 fixed levels: 2260,2730,3080,3230,4700,5920,6300 Adjusting steps:1 |
Working mode | Single probe (receiving and sending), double probe (one for receiving and another for sending), transmission(transmission probe) |
FrequencyRange (MHz) | 0.4–20 |
Gain adjustment (dB) | 0~110 Adjusting step: 0.0,0.2,0.5,1,2,6,12 |
Reject | 0%~80% of screen height, step: 1% |
Vertical linear error | Vertical linear error is not more than 3% |
Horizontal linear error | Not more than 0.2% in the scanning range |
Sensitivity Leavings | ≥62 dB |
Dynamic range | ≥32dB |
Alarm | Three modes, i.e. forbidden wave, loss wave and auto |
Monitoring door | 2, expressed by bold transverse line, whose start, width and height are adjustable. Adjusting range of start (mm): horizontal pixel 0~208, the displayed value is relative with the scanning range. Step: value in mm corresponding to a pixel (relative with the scanning range) Adjusting range of width (mm): horizontal pixel 4~212, the displayed value is relative with the scanning range. Step: value in mm corresponding to a pixel (relative with the scanning range) Adjusting range of height: 2%~90% of vertical graduation Step graduation: 1% |
Display | Display: high-brightness lattice |
A-Scan display area | Full screen or local A-Scan display freezing and de-freezingA-Scan filling |
Data save | 300 A-Scan images (including setting of instrument) 30000 values of thickness (300 sets) |
Standard interface | RS232 for communication with PC |
Measuring unit | mm/inch |
Battery | Li battery 4×3.6V4800mAh |
Power adaptor | Input 100V~240V/50Hz~60Hz Output 9V~12VDC/1.5A |
Working temperature | -20°C~70°C |
Working humidity | 20%~90% |
Port type | BNC |
Dimension (mm) | 240×180×50 |
Weight (kg) | 1.8 |
