Garbage Incinerator for Marine Environement
The hangyu marine Waste Incinerator type HYINC-18,which is designed
for on board incineration of ship’s waste oil and solid,it mainly
consists of four parts:
A.combustion chamber with diesel oil burner,sludge burner,and
electric control panel.
B.flue gas fan
C.flue gas damper.
D.sludge tank with circulating pump and heater.
The Waste Incinerator HYINC-18 is equipped with single door in
front,which are intended for loading Of solid waste and ash
removing,the incinerator in stand-by mode(com.tem.less than
220°C),the doors can be opened properly.if the incinerator is
running in cooling down mode,the door can be opened till
com.tem.less than 100° C and incinerator fully stop.
The electrical control panel is installed on the incinerator and it
contains fuses,starters,PLC and
Operator panel.the electric panel is built according to
international standards for marine equipment.
The operator panel which is located at the right side of the
control panel has a touch screen and
Defined keys for system starting/stopping and selecting burner
modes.the burning process is controlled by the PLC and monitored by
the HMI(human machine interface)and scanned by a photo resistor.the
combustion chamber temperatures are also regulated automatically by
the PLC control system.
Waste Incinerator Type | HY INC-18 | |
Waste Incinerator Capacity | 180,000 kcal/h ( 208KW) 22.5 kg/h IMO sludge oil 14,4000Kcal/h solid waste | IMO sludge (20% water content) IMO class 02 solid waste |
Combustion chambertemperature | Max. 1180 8C Working 850-1150 8 C | |
Flue gas temperature | Max. 375 8C Working 250-340 8 C | |
Surface temperature | Less than ambient temperature +20 8 C , and less than 60°C | |
Electrical power Consumption | 7kW | |
Negative pressure | 5-35 mm WC | Negative pressure in combustion chamber |
Total weight | 1500 kg | |
Outline dimension | | See dimension drawing (APPENDIX) |