DW-LCBC5708 is a fiber optic LAN card with datarate 1.25Gb/s. The
fiber port can be sm or mm, single fiber or dual fiber, SC or ST
connector, 550m to 120km can be choosed.
Overview
The DONGWE DW-LCBC5708 is a high performance PCI Express
multifunction network adapter for either
standard or low profile slots running over a fiber-optic network
environment.
In addition to delivering Gigabit Ethernet networking, the
DW-LCBC5708 supports TOE (TCP/IP Offload
Engine) for Windows only, Internet Small Computer System Interface
(iSCSI).
Advantages
Use the server chipset,can support more fuctions
Comptaible all the OS
PCB 4 layer,1.5oz,4mil,more stable,longer using time,smaller
resistance
Two line power : 3.3v/1.2v
DC-DC power supply,avoid the card effecting by power influence
All use the good quality materials
Support PXE
Use the TI power controller,the best controller manufactures in
the world,it can provide a stable working enviroment
Standard Features
Performance Gigabit Ethernet Throughput
Up to 1000Mbps Ethernet transfer rate delivers outstanding network
performance that improves response
time and removes bottlenecks across the entire network.
TCP/IP Offloading
TCP/IP Offload Engine (TOE) for Windows moves the processing of
data in the TCP protocol stack from the
server CPU to the network card, freeing CPU cycles for other
duties.The DW-LCBC5708 supports TOE
when Windows TOE Chimney is installed. With TOE, network
communications are improved, and server
efficiency is increased.
Accelerated iSCSI
Accelerated iSCSI allows the DW-LCBC5708 to multi-function as both
as a network adapter and as a storage
host bus adapter, thereby providing access to storage platforms and
to servers over a single
connection.Additionally,the DW-LCBC5708 offloads the iSCSI software
to the hardware for improved
performance.
Load Balancing
Transmit Load Balancing (TLB) and Switch-Assisted Load Balancing
(SLB) are two advanced features used
to build a bigger pipe for improved networking bandwidth. These
port bonding techniques enable users to use
up to eight adapter ports in a ProLiant server and aggregate their
throughput up to a theoretical maximum of
16 Gigabits per second full-duplex transmission.
Checksum and Segmentation Offloads, and Interrupt Coalescing
When running as a standard Gigabit adapter, the DW-LCBC5708
features TCP Checksum Offloads as well
as TCP Segmentation Offloads and Interrupt Coalescence. These
features reduce the load on the CPU for
overall improved system response. Interrupt Coalescence is a
feature that groups multiple packets and
issues a single interrupt to the host. This process improves host
efficiency.
Scalability and Reliability
Network Fault Tolerance, sometimes called "failover" or "NIC
redundancy," allows for the installation of
multiple server adapters or other network adapters so that the
active device can be backed up by a redundant
adapter to improve availability. The HP teaming utility also allows
users to specify that when a failed adapter
is fixed and replaced, the original adapter resumes its function as
the primary network connection.
Management Support
DW-LCBC5708 supports SNMP.
Configuration Utilities
Enable initial diagnostics within Windows, Linux, and DOS operating
systems.Configure network adapter
teaming in a Windows environment. The Windows adapter teaming
configuration utility includes a patented
teaming GUI for Microsoft Windows 2000 and 2003 operating systems.
Support for scripted installations of
teams in a Microsoft Windows environment allow for unattended OS
installations.
LED Indicator
A single bracket LED indicator shows link integrity and network
activity for easy troubleshooting.
Technical Specifications
Compliance
IEEE 802.3z, 802.3x, Dynamic 802.3ad, 802.3p, 802.1Q
PCI Express ver 1.0a
General Specifications
Main chip: Broadcom 5708C
On-board memory:92KB
Data rate:1000 Mbps, Half- and full-duplex
Data path:Four lane (x1) PCI Express compatible with x1, x4, x8,
and x16 PCI Express slots
Interrupt levels: INTA
Connector: SC low profile
Distance and cabling:Up to 1,804 ft/550 m with multimode fiber
(50µm/125µm) Up to 722 ft/220 m with multimode fiber
(62.5µm/125µm)
Power and Environmental Specifications
Operating Temperature: 32°to 131°F (0°to 55° C)
Operating Humidity: 10% to 90% non-condensing
Non-operating Temperature: -40°to 185°F (-40°to 85°C)
Non-operating Humidity: 5% to 95% non-condensing
Operating system support Standard Gigabit Ethernet:
DOS NDIS2
Netware(ODI16)
Windows XP 32-bit(64-bit)
Windows Server 2003 32-bit(64-bit)
Windows Vista 32-bit(64-bit)
Windows 7 32-bit(64-bit)
Windows 8 32-bit(64-bit)
Windows 8.1 32-bit(64-bit)
Windows Server 2008 32-bit(64-bit)
Windows Server 2008 R2 32-bit(64-bit)
Windows Server 2012
Windows Server 2012 R2
Linux
Sun Solaris
VMware ESX/ESXi 4.1/5.0/5.1/5.5
Ordering Information:
Part Number Description
DW-LCBC5708 PCI Express x1 Gigabit Port( Broadcom 5708
Based),SM or MM,550m-120km
PS: The above details is just for reference,if there is any change,no
inform will have.
contact:
email: sales055@dongwe.cn
skype: dongwe055
whatsapp: +86 189 2640 2115
