electrostatic powder coating spray machine

chinacoal03

electrostatic powder coating spray machine

Powder coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating does not require a solvent to keep the binder and filler parts in a liquid suspension form. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin". The powder may be a thermoplastic or a thermosetpolymer. It is usually used to create a hard finish that is tougher than conventional paint. Powder coating is mainly used for coating of metals, such as "whiteware," aluminium extrusions, and automobile and bicycle parts. Newer technologies allow other materials, such as MDF (medium-density fibreboard), to be powder coated using different methods.

Product Configuration:

Electrostatic Powder gun x1 + Controller x1 + Powder Pump x1 + Powder Hopper x 1 +Trolley x1 + oil-water separator x1 + Air pressure regulating valve x1

Technical parameter

A). Controller:

Input power voltage: 110V-240V, 50-60Hz , Different countries, different standard

Input power: 30w

B). Powder supply & Air source

Electromagnetic valve control voltage: 24V DC

Input air pressure: 0-0.6Mpa

Output air pressure: 0-0.5Mpa

Max. Air consumption: 13.2m³/h(0.4Mpa)

Stainless Steel Powder Hopper Capacity : 55L

C). Electrostatic Powder Coating gun

Input air pressure: <=0.3Mpa

Output powder volume: Max. 650g/min

Output power voltage: 0~ 100kv Negative

Output current: 0-150uA

Weight of Powder Coating Gun : 490g

Powder Gun Cable: 5m