Active Member
|
Address: Room 2005,Building B,Shiqiao Industrial Area,Panyu District,Guangzhou City,China
Phone: 86-20-29836698
Contact name:Ms. Eva Yang
Guangzhou Comax Communication Co.,Ltd. |
|
|
Description:10/10/1000M Optical Fiber Media Converter RJ45 Port
Fiber media converter is a newly high-performance transmission device . All performance indexes for the device and system conforms to international standard and technical demand by your company. This fiber media converter applies to metro optical digital broad-band network designed for high-quality, high-reliability, high broad-band and cost-effective and also located to broad-band network access market. We can provide users the cost-effective metro broad-band optical network solution with sufficient broad-band, sustainable performance and powerful function as well as used for telecom operation service.
Technology parameter:
--Connectors: UTP Connector: RJ-45, 10/100Mbps; Fiber Connector:
ST/SC/FC, 100Mbps
--Apply to the standard: IEEE802.3 10Base-T, IEEE802.3u 100Base-TX,
100Base-FX
--10M/100M adaptive
--Electric connector: crossing-line and parallel line adaptive
-- Full Duplex and Half Duplex working mode
-- Flow Control
Full Duplex: Supporting standard IEEE802.3x
Half Duplex: back pressure
--support max 1916bytes data frame (optional)
--Internal lightning proof circuit, can reduce the damage from
lightning
--Cable:
UTP: Cat. 5/5e/6 (the max distance up to 100m)
Fiber (Single mode): 8.3/125, 8.7/125, 9/125, 10/125μmthe max
distance up to 20km
--6 LED: Power, FX SD, FX Link/Act, TX 100, TX FDX, TX Link/Act.
--internal power supply or external power supply: AC100 265V / DC5V
--Ambient Temperature: 0 --50 centigrade
--Storage Temperature - 40--70 centigrade
--Humidity: 5--90%
--Dimensions: Internal power: 30×120×140mm
External power: 26×70×93mm
Technical parameter
System Parameter | Technical Index | |
Interface | RJ45, LC | |
Optical Fiber | Single-mode/multi-mode optical fiber Single fiber or dual fiber | |
Standard and Protocol | IEEE 802.3/ 802.3u Ethernet IEEE802.3ab 1000BaseT(electric interface) IEEE802.3z 1000BaseX(optical interface) IEEE 802.1d Spanning Tree IEEE 802.1q VLAN TAG IEEE 802.1p QoS | |
Dimension | Standalone | 110(W)×30(H)×140(D) (mm) |
Inserting Card | 25(W)×88(H)×116(D) (mm) | |
Environment Requirement | Operating Temperature | -10°C ~ 60°C |
Storage Temperature | -40°C ~ 80°C | |
Relative Humidity | 5% ~ 95% (non-condensing) | |
Power Supply (Standard) | 220V/AC,50Hz, -48V/DC(optional) | |
Safety and EMC | Compliant with standard of FCC, UL, CE, TUV, CSA | |
Consumption | Chassis (full-insertion) | < 80W |
Standalone | < 5W | |
