12/24/48 Cores Fiber Splice Closure Horizontal
FOSC-H007 provide with 4 fiber cable in-out round ports and the
cable diameter is from Ф7-Ф16. It is made of high-quality ABS or PC
plastic and with the mechanical seal structure filled with the seal
material.
Specification:
Dimension (cm): 46.5 X 18.8 X 12
Weight (kg): 2.7
Cable diameter(mm): Ф7-Ф16
Cable entry ports: 2 in & 2 out
Max. Capacity: 60
Application:
Aerial -hanger
Wall-mounting
Directly buried
Descriptions:
- The enclosure casing is made of quality engineering plastics, and
of good performance of anti-erosion against acid and alkali salt,
anti-aging, as well as smooth appearance and reliable mechanical
structure.
- The mechanical structure is reliable and has the performance of
resisting wild environment and intensive climate changes and
serious working environment.
- The protection grade reaches IP66.
The closures are applicable to ribbon type optical cable and common
optical cable. - The splice trays inside the closure are turn-able like booklets,
and have adequate curvature radius and space for winding optical
fiber to make sure the curvature radius for optical winding 40mm.
- Each optical cable and fiber can be operated individually.
The closure is of small volume, big capacity and convenient
maintenance.
The elastic rubber seal rings inside the closure are of good
sealing and sweat-proof performance. The casing can be opened
repeatedly without air leakage. No special tools are required. - The operation is easy and simple. The air valve is provided for the
closure and used to check the sealing performance.
-
Technical Specifications:
- Seal performance: after the box is sealed, inflate to 100kPa
inwards (inflation only apply to the models with the air hole), and
then soak it in the water of normal temperature, after 15 minutes
of steady observation, there is no bubble to overflow.
- Insulation resistance: the insulation resistance between the metal
work piece and the earth is greater than 20kM.
- Pressurization: there is no breakdown or flashover under
15kVdc/1min between the metal work piece and the earth.
- The curvature radius of the fiber 40mm, without extra loss inside
the splice tray.
- It can bear the axial tensile strength no less than 1000N.