Home Companies Wuxi Easony Machinery Co., Ltd.

Gcr15 SAE52100 100Cr6 Suj2 Bearing Inner Ring For Shell Type Needle Roller Bearings

Contact Us

[China]

Trade Verify

Address: RENMING MIDDLE ROAD 139,LIANGXI DISTRICT,WUXI,JIANGSU,CHINA

Contact name:SHEN

Wuxi Easony Machinery Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Gcr15 SAE52100 100Cr6 Suj2 Bearing Inner Ring For Shell Type Needle Roller Bearings

Country/Region	china
City & Province	wuxi jiangsu
Categories	Ceramic Fiber Products

Product Details

Bearing Parts Inner Rings for Shell-Type Needle Roller Bearings

Product:BIR4003 Double row ball bearing ring

In our huge range of Needle Roller Bearings, we keep a large selection of accompanying Metric Inner Rings and Imperial Dimension Inner Rings that exceeds even the range of the major bearing manufacturers.

Inner rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our inner rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They’re an economical alternative to bushings because they don’t require any additional machining. Wide inner rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner rings come in a broad range of shaft diameters, and assembly elements include small chamfers or gentle taper relief options.

Surface treatment:Plain finish,ZINC plated, color zinc or as your requirement

Standard:ASTM GB DIN JIS EN etc.

Material:Gcr15 SAE52100 100Cr6 SUJ2

specification:Thickness:1mm-150mm

Outside diameter:4mm-914mm

Technology:Cold-drawn,Cold rolling,Hot rolling

Length:Available on request

Delivery time:Generally 7-15 days, depending on customer demand

Surface treatment:Polished, bright, pickling, etc

Application:Used in petroleum, chemical industry, aerospace, paper, automobile, packaging machinery,

decoration, railings and other engineering, hardware processing, ships, power plants and other industries.

Subjection : Specificationsfor Raw Material of Sleeves (High Carbon - Chromium Bearing Steel Tubes)
1. Specifications for Finish Tubes
Material : GCR15/SAE 52100/100CR6/SUJ2 or Its Equivalent
Reference: GB/T 18254; YB-T 4146; SKFD33;
S13000; JISG4805; ASTMA295;
A. Chemical Composition
	C	Si	Mn	S	P	Cr	Al	O₂	H2	N2	Ti (ppm)
								(ppm)	(ppm)	(ppm)
MIN.	0.95	0.15	-	-	-	1.3	-	-			-
MAX.	1.1	0.35	0.5	0.025	0.025	1.6	0.05	15	1	100	30
B.Microstructure
Spherodised Annealed, consist of uniformly distributed spheroidalcarbides in a matrix of ferrite and shall be free from excessive carbidesegregation.
C. Macro Etch Test
Billet sample taken in accordance with A295 shall be macro-etched and examined.
It should be free from pipe, porosity and injurious defects.
D. Non Metallic Inclusions :
According toA.S.T.M A 295 for through hardening bearing steel the inclusion rating shall beperformed using the recommended ASTM - E 45 Method -D and the rating shall notexceed the limits specified below:
	A		B			C			D
Thin	Heavy		Thin	Heavy		Thin	Heavy		Thin	Heavy
2.5	1.5		2	1		0.5	0.5		1	1
E. Decarb Layer:
Surfacedefects inclusive of decarburized depth not to exceed 0.25mm.
Total decarburized depth is defined as distancefrom the surface of decarburized layer to the position where the difference inchemical or physical properties between the decarburized layer & the
corematerial is no longer determinable.
F. Surface Quality :
Noscratch marks & cracks. The tubes shall be well finished and the outside& inside surfaces shall be free from injurious defects for practicaluse.All tubes shall be inspected for ultrasonic tests as per ASTM D213.
G. Manufacturing process :
Cold Drawn or Cold Pilgered.
H. Product Tolerance
Sr.No.		OD(mm)					Tube wall thickness
Sr.No.		OD(mm)					(mm)
1		0					-0.0/+5% of WT

I. Other specifications
Parameter			Specification
Hardness			220 BHN max
Magnetism			Material will be free from magnetism.
Straightness			1 mm per Meter on any running length
Length			5.8m max.
Inspection			All tubes will be 100% inspected by PMI test or spark test to ensure to no mix-up of material.
Marking			Manufacturer’s mark & name, Grade, size, Heat Number, Year
			& month of manufacture.
Coating			Rust preventive oil on outside & inside surfaces.

Production Detection:

1. Complete testing facilities

2. Perfect measurement methods

3. Perfect production detection methods

4. Strong QC team,conduct comprehensive quality control

FAQ

Q1:who are we?
A:We are based in WUXI, China, start from 2016,sell to Asia(60.00%),Western Europe(14.00%),South

America(6.00%).

Q2. how can we guarantee quality?
A:Always a pre-production sample before mass production; Always final Inspection before shipment.

Q3.what can you buy from us?
A:Copper,Aluminum,Mould steel, Seamless carbon steel,Precision steel pipe,The steel plate,Alloy steel

Titanium,Custom machine parts.

Q4.why should you buy from us not from other suppliers?
A:Wuxi Easony Machinery Co., Ltd. has 8 years of production experience. With advanced precision

production equipment and modern large warehouses, has a stockpile of 200,000 tons of goods, has a number

of long-term stable cooperative customers.

Q5.what services can we provide?
A:Accepted Delivery Terms: FOB,CFR,CIF,EXW；Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,

HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,PayPal;Language Spoken:English,Chinese.

Q6.Can we get the some samples?Any charges?
A:Yes,you can get available samples in our stock.Free for real samples,but customers need to pay the freight cost.

Q7.How can we get your price ?
A:We need below information to quote for you:
1)Product Name
2)Standard
3)Material Grade (Chemical Composition)
4)Dimension
5)Quantity
6)The Drawing for Special Parts