Active Member
|
[China]
Address: NO.58 PARK,QINLAN TOWN TIANCHANG CITY CHINA
Contact name:Lavia
Anhui SURE ELECTRONICS CO.,LTD |
|
|
Operating Instructions:
1. Plug the AC-to-DC adapter to electrical outlet and connect the
other end to charger
2. LED will change to Green, which indicate power is on and ready
for charging mode
3. Insert CRV3 / RCRV3 battery into charger
4. LED will turn RED, which indicate the battery is charging
5. When the battery is fully charged, LED will change from red to
green
6. Remove the battery pack from the charger
7. LED will change back to green once you remove the battery from
charger
Item No.: | Item No.LA-12V |
Input: | 100-120V/220-240V 50-60HZ |
Output: | 12V 10A |
Constant current: | 10A |
Float Voltage: | 13.8V~14.7V |
Used for: | 12V Lead Acid Battery |
Charging Mode: | 3 Stages, CC, CV, Trickle |
Material: | Aluminum Alloy |
Dimension: | 170*90*50mm |
Net Weight: | 1kg |
Color: | Silver |
Various Protection: | Over current, Over Voltage, Over Temperature, Short Circuit and
reverse polarity. |
Remarks | Porduct can be Customized! |
Description |
Microprocessor Control (CPU). 3-STAGE AUTOMATIC CHARGING: This is a fully automatic battery charger with 3 charge stages. Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely. 3-stage chargers are suitable for most lead acid battery:Calcium, Gel and AGM, Wet batteries. They may also help restore drained and sulphated batteries. 1: Input Characteristics: Input Voltage: 100-240V AC Input Frequency: 50Hz or 60Hz and single phase. Inrush Current (cold start):30A Max.@110Vac/60HZ/ 60A Max.@230Vac/50HZ Efficiency: ≥85.0% 230Vac/50Hz(Typical full load) 2: Output Characteristics: Constant Charging Voltage: 14.7V Float charge 13.8V C:Charging Mode Intelligent 12V 5-6A lead acid battery charger 3 Stages, CC, CV, Trickle 4: Safety Test for battery charger Hi-pot Test:15KVac 5mA 3 Seconds between input and output test Resistance:The liftpo4 battery charger insulation resistance shall be not less 30M ohms after application of 500Vdc/10mA for 3 Seconds Drop test: Height: The wheelchair battery chargerconform to BS EN60068-2-32:1993 TEST ED: free fall appendix B 5: Protection for battery charger Over Voltage Protection:The power supply will be auto recovered when faults remove Over Current Protection: Charger output current does not exceed the set maximum battery charging current. Over Short Circuit Protection :Battery charger output can be shorted without damage No odor, smoke, fire, plastic deformation, and excessive heal happen. The power shall be auto-recovery. (It will enter into normal condition when then the fault condition is removed) Over reverse polarity Protection When the battery charger output line reversed after the charger will not work until the right user access only to start. |
Our Service
1. OEM Manufacturing welcome: Product, Package,logo and brand.
2. Sample order :Free sampls but you need pay for freight.
3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two
days, until you get the products. When you got the goods, test
them, and give me a feedback.If you have any questions about the
problem, contact with us, we will offer the solve way for you.
FAQ:
1. The LED turns off while charging.
-This charger has a build-in thermal protection function. Battery
charging is shut off when the temperature of charger increases
beyond set limit, and LED turns off (no color). Once the charger
temperature drops to acceptable limit, the charging process is
resumed and the LED turns on (Green/Red color).
2. LED color changes to Yellow
-This indicates that battery is not being charged correctly. Remove
the battery pack from Charger and re-insert into charger. If this
occurs repeatedly, either battery is dead or charger is not
working.
3. Battery is inserted in the charger, but the LED does not change
to RED.
-This indicates that battery is not being charged correctly. Remove
the battery from charger and re-insert into charger. If this occurs
repeatedly, either battery is dead or charger is not working.
4. LED changes to Green, but the capacity is too low.
-This indicates that battery is not being charged correctly. Remove
the battery from charger, clean the contacts with a soft clean
cloth, re-insert into charger. If this occurs repeatedly, either
battery is dead or charger is not working.
