Active Member
|
[China]
Address: 36# Yuefeng Road Zhangjiagang City Jiangsu Province China
Contact name:JACKY
Zhangjiagang City Stelle Coating Equipment Co.,Ltd. |
|
|
Stelle All-In-One Solution:
Wet Sand Blasting Machine
key Features:
1. Open the sanding port and remove the downward airing hose from
the control cabinet. Before loading the water and abrasive into the
tank, rinse the sandblasting tank with water, release the flushing
water, and reconnect the hose.
2. Add abrasive to the blasting tank (minimum 4 bags, 25kg high
quality abrasive for each bag, up to 10 bags)
3. Fill the blasting tank with clean water, and the amount of water
should exceed 5CM of abrasive.
4. Close the sanding port and the abrasive ball valve, open the
balloon valve to inflate, wait for the pressure to come up. Press
the sandblasting control switch to start the sandblasting
operation. (Note: Wait for the abrasive before it reaches the blast
nozzle)
5, the first use should need to understand the consequences of
starting from the large readings, maintain a distance of 40cm
between the working surface and the blasting nozzle, observe the
results, then narrow the distance, make the angle steeper, and
finally achieve an optimal blasting effect.
Basic parameters:
Volume: 8 Cubic Foot Capacity ( 0.2 m³) Height: 63" H ( 1.6m H) Pressure: 30-150 PSI Opening Method: Air Control Net Weight: 160KG Required Compressor: 185+ CFM Approximate Runtime: 30 Mins Guaranteed |
Content :
1. Cylinder valve 2. Sand control valve handle 3. Feeding hole
4. Ring 5. Moving rod 6. Control conversion box
7. Vibration valve 8. Moving rubber wheel 9. Butterfly valve
10. Sandblasting gun 11. Sand tube gun seat 12. Hand valve switch
13. Sandblasting hose 14. Control color tube 15. Booster tube
16. Air valve switch 17. inlet ball valve 18. Three links
19. Pressure-regulating valve 20. Waterhole 21. outlet ball valve
22. Quick Connector 23. Safety valve 24. Sanding valve
Check the Operating Video in Our Youtube Channel Link Below:
