Zhangjiagang City Stelle Coating Equipment Co.,Ltd. |
|
Cabinet Dustless Glass Bead Blast Cabinet Surface Preparation Glass
Sandblasting Machine Product Introduction
The glass blasting machine is suitable for processing flat glass,
marble, metal and other plates. It belongs to the vertical pass
type dry blasting machine and is suitable for workpieces with a
width of fewer than 2.4 meters, but the length is not limited.
The characteristics of the glass blasting machine are to clean the
impurities on the edge of the glass and to be planarly processed
into a frosted glass.
Our glass blasting machine can be customized according to your
requirements. This machine mainly deals with the surface oxide of
solar glass and the metal oxide of the semiconductor. It can clean
the four sides of the glass and achieve the fully automatic
requirements!
Technical Features:
MODEL | STR-1200 GLASS SANDBLASTING MACHINE |
WORKROOM SIZE (mm) | 900×700×2000 |
MACHINE SIZE(mm) | 3000×1000×2300 |
OUTER CONVEYING SIZE (mm) | 1800×600×100(2pcs) |
COMPRESSED AIR SOURCE | 2-8bar(kg/cm2) |
SEPARATOR MOTO E | 220V 50HZ 550W |
SEPARATOR AIR VOLUME | 8.5m3/min |
LIGHTING | 220V 30W |
MACHINE WEIGHT | 400 kg |
MACHINE TYPE | STR-BL Glass edge blasting machine |
MACHINE SIZE(mm) | 3380 ×1200× 2080 |
DUST REMOVAL SYSTEM | 800× 800× 2480 |
DUST REMOVAL MOTOR | 1.5KW 380V |
SPEED MOTOR | 1.5KW 380V |
GUN WORKING PRESSURE | 0 .28 - 0.7Mpa |
OPTIMAL WORKING PRESSURE | 0.4 - 0.6 Mpa |
FLOW OF EACH GUN | 0.8 - 1.2m3/min |
INNER DIAMETER OF EXTERNAL GAS SOURCE | ¢13mm |
ABRASIVE | 46-220# |
SPRAY GUN | 4 |
DUST REMOVAL METHOD | Bag-type dust removal system uses 16 bags of dust removal |
Product Features:
Electroplating, spraying process, improve adhesion; All kinds of mold, casting parts, metal, nonmetal surface heat treatment, to oxide skin, to the residue, rust, oil, refurbished; All ceramic products, glass products, plastic products, light act the effect!