Home Companies Changsha Sollroc Engineering Equipments Co., Ltd

SOLLROC Reverse Circulation Hammer 3 Remet 1.5-3.5Mpa Working Pressure

Contact Us

[China]

Trade Verify

Address: No55. Jiucaiyuan road, Furong District, Changsha, Hunan,China

Contact name:Ling Bo

Changsha Sollroc Engineering Equipments Co., Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

SOLLROC Reverse Circulation Hammer 3 Remet 1.5-3.5Mpa Working Pressure

Country/Region	china
City & Province	changsha hunan

Product Details

RE531 3'' Reverse Circulation RC Drill Hammer For Hole Drilling in Mines

Product Introduce:

RC hammers and bits are used in hole drilling in mines, hydrology and water well, geothermal well, geothermal air conditioning well, geologic exploration, gravel stratum, etc. Especial suitable for complicated formation (Formation loose, difficult to drilling and unstable of hole wall), exhausting for deep hole, environment protection.

Adavantages:

1.Although the process can be costly the overall drilling costs can actually be reduced by up to 40% when using reverse circulation drilling.

2.Results from reverse circulation drilling can be revealed much faster as the completion of the drilling process is done quickly.

3.The method is safe to use and requires fewer man hours.

4.Reverse circulation drilling requires less water than other mining methods.

Specification:

RE531 Hammer

Hammer	Bit Shank	Hole Range (mm)	External Diameter (mm)	Length (less bit) mm	Weight (kg)	Connection Thread	Working Pressure
RC3-E531	SRC531	84-100	81	1069	29	3" Remet	1.5-3.5Mpa

Other size hammer

Hammer	Bit Shank	Hole Range (mm)	External Diameter (mm)	Length (less bit) mm	Weight (kg)	Connection Thread	Working Pressure
RC3.5-Y	SRC3.5Y	98-115	94	1184	44	3" Remet	1.5-3.5Mpa
RC3-E531	SRC531	84-100	81	1069	29	3" Remet	1.5-3.5Mpa
RC4-E004	SRC004	111-127	107	1252	52	3.5" / 4" Remet 4" Metzke	1.5-3.5Mpa
RC4.5-E542	SRC542	113-130	109.5	1191	57	3.5" / 4" Remet 4" Metzke	1.5-3.5Mpa
RC4.5-E543	SRC543	120-135	116	1191	63	3.5" / 4" Remet 4" Metzke	1.5-3.5Mpa
RC4.5-E545	SRC545	122-135	117.5	1261	65	4" / 4.5" Remet 4" / 4.5" Metzke	1.5-3.5Mpa
RC5-P40	SPR40(SPR040)	124-142	120.5	1362	80.5	3.5" / 4.5"Remet 3.5" / 4.5"Metzke	1.5-3.5Mpa
RC5.5-P52/P52R	SPR52/SPR52R	126-142	121	1227	68.5	4" / 4.5"Remet 4" / 4.5"Metzke	1.5-3.5Mpa
RC5.5-E547	SRC547	130-146	124.5	1270	74	4.5" Remet 4.5" Metzke	1.5-3.5Mpa
RC5.5-P54/P54R	SPR54(SRC054)	135-150	130	1294	84.5	4.5"Remet 4.5"Metzke	1.5-3.5Mpa
RC5.5-M5456	MX5456	136-150	132	1362	90	4.5"Remet 4.5"Metzke	1.5-3.5Mpa

Detailed Photo:

About us:

SOLLROC Reverse Circulation drilling (RC) ,from size 3’’ to 5.5’’, is a technique of drilling that uses dual wall drill rods that consist of an outer drill rod with an inner tube. By using compressed air to extract rock fragments sample,the samples travel through rods to a sample splitter at surface, avoiding all contact between the samples and the borehole wall that allows samples to be retrieved with minimal contamination,which is mainly used in deep hole exploration and mining grade control.

Delivery Way:

By Air, By express or By Sea