Home Companies Changsha Sollroc Engineering Equipments Co., Ltd

4 3/4'' 121mm Shank SRC004 Reverse Circulation Drill Bits

Contact Us

[China]

Trade Verify

Address: No55. Jiucaiyuan road, Furong District, Changsha, Hunan,China

Contact name:Ling Bo

Changsha Sollroc Engineering Equipments Co., Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

4 3/4'' 121mm Shank SRC004 Reverse Circulation Drill Bits

Country/Region	china
City & Province	changsha hunan

Product Details

4 3/4'' 121mm Shank SRC004 Reverse Circulation RC Drill Bit In Black For Sampling

Product Introduce:

This reverse circulation drill bits are widely used in the following applicaiton field: Geologic exploration samples and grade control for mining, etc. And it's specifically designed to work with RC Hammers.

SRC series reverse circulation DTH Hammer bits is the latest developed product of our company. It is mainly used for deep exploration drilling and ore grade control.

Technical Parameters

RC bits Model SRC004

Diameter		No x Button diameter mm		Button angle	Flushing holes	Shroud Dia mm	Weight (kg)	Part No.
mm	inch	Gauge Button	Front Button	Button angle	Flushing holes	Shroud Dia mm	Weight (kg)	Part No.
114	4 1/2	8 x 14mm	8 x 13mm	35	2	112	11.8	SRC004-114
118	4 5/8	8 x 14mm	8 x 13mm	35	2	116	12.0	SRC004-118
121	4 3/4	8 x 14mm	8 x 13mm	35	2	119	12.4	SRC004-121
127	5	8 x 14mm	8 x 13mm	35	2	125	12.8	SRC004-127

Adavantages:

1. the samples extracted by RC drilling are reliable and free of contaminants
2. the method is timely and cost-efficient
3. it is well-suited for difficult terrains
4. it has high penetration rates
5. it has minimal environmental impact

Working principle

The on-board compressor delivers power to a pneumatic reciprocating piston. The piston, in turn, drives a tungsten-steel drill bit which is purpose designed to be able to crush hard rock.

Similar to air core drilling, drill cuttings are returned to surface inside rods. We achieve this through the use of dual wall drill rods: an outer drill rod with an inner tube. When compressed air is blown through the rod, the volume displaces the air, lifting the samples to the surface.

Once cuttings reach a diverter at the top of the hole, they’re moved through a hose and around the cyclone, which slows the sample down. From the cyclone the sample goes over a splitter that delivers a percentage of the entire sample into a sample bag. The exploration drilling team then collect the samples aligned to the hole depth and lay them out for the client to log, and then transport to the lab for assay.

Detailed Photo:

About us:

SOLLROC Reverse Circulation drilling (RC) ,from size 3’’ to 5.5’’, is a technique of drilling that uses dual wall drill rods that consist of an outer drill rod with an inner tube. By using compressed air to extract rock fragments sample,the samples travel through rods to a sample splitter at surface, avoiding all contact between the samples and the borehole wall that allows samples to be retrieved with minimal contamination,which is mainly used in deep hole exploration and mining grade control.

Delivery Way:

By Air, By express or By Sea