Home Companies Changsha Sollroc Engineering Equipments Co., Ltd

Deep Hole Exploration Reverse Circulation SRC531 3'' Carbide Drill Bits

Contact Us

[China]

Trade Verify

Address: No55. Jiucaiyuan road, Furong District, Changsha, Hunan,China

Contact name:Ling Bo

Changsha Sollroc Engineering Equipments Co., Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Deep Hole Exploration Reverse Circulation SRC531 3'' Carbide Drill Bits

Country/Region	china
City & Province	changsha hunan

Product Details

Reverse Circulation 3'' Carbide Drill Bit For Deep Hole Exploration Drilling

Product Introduce:

This reverse circulation drill bits are widely used in the following applicaiton field: Geologic exploration samples, Oil wells and ore mining, etc. And it's specifically designed to work with RC Hammers.

Reverse circulation drilling is compared with the conventional circulation method called positive circulation, in which the flushing medium is fed into the bottom of the drill hole through the inner hole of the drill rod and returns to the ground along the annular gap outside the drill rod. The speed of return is high, and it is very strong to carry rock powder. Rocks that have been drilled at the bottom of the hole can be discharged in time and quickly return to the surface.

Technical Parameters

RC bits Model SRC531

Diameter		No. x Button diameter mm		Button angle	Flushing holes	Shroud Dia mm	Weight (kg)	Part No.
mm	inch	Gauge Button	Front Button	Button angle	Flushing holes	Shroud Dia mm	Weight (kg)	Part No.
86	3 3/8	6 x 12mm	5 x 12mm	35	2	84	6.0	SRC531-86
89	3 1/2	8 x 12mm	5 x 12mm	35	2	87	6.1	SRC531-89
95	3 3/4	8 x 12mm	6 x 12mm	35	2	93	6.3	SRC531-95
102	4	8 x 12mm	6 x 12mm	35	2	100	6.5	SRC531-102

Adavantages:

1. Reliable quality

2. Long service life

3. Smooth flushing effect

4. Higher productivity

5. Designed to work with RC hammers

Working principle

The on-board compressor delivers power to a pneumatic reciprocating piston. The piston, in turn, drives a tungsten-steel drill bit which is purpose designed to be able to crush hard rock.

Similar to air core drilling, drill cuttings are returned to surface inside rods. We achieve this through the use of dual wall drill rods: an outer drill rod with an inner tube. When compressed air is blown through the rod, the volume displaces the air, lifting the samples to the surface.

Once cuttings reach a diverter at the top of the hole, they’re moved through a hose and around the cyclone, which slows the sample down. From the cyclone the sample goes over a splitter that delivers a percentage of the entire sample into a sample bag. The exploration drilling team then collect the samples aligned to the hole depth and lay them out for the client to log, and then transport to the lab for assay.

Detailed Photo:

About us:

SOLLROC Reverse Circulation drilling (RC) ,from size 3’’ to 5.5’’, is a technique of drilling that uses dual wall drill rods that consist of an outer drill rod with an inner tube. By using compressed air to extract rock fragments sample,the samples travel through rods to a sample splitter at surface, avoiding all contact between the samples and the borehole wall that allows samples to be retrieved with minimal contamination,which is mainly used in deep hole exploration and mining grade control.

Delivery Way:

By Air, By express or By Sea