Home Companies Shenzhen FHB Audio Technology Co., Ltd.

12X12 Programmable Speaker DSP Processor ANC for Professional Audio System

Shenzhen FHB Audio Technology Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: No.312, 2712 SongBai Road, LongTeng Community, Shiyan Street, Baoan District, Shenzhen, Guangdong , China.518108

Contact name:Iris

Inquir Now

Shenzhen FHB Audio Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

12X12 Programmable Speaker DSP Processor ANC for Professional Audio System

Country/Region china
City & Province shenzhen guangdong
Categories Speakers
InquireNow

Product Details

 Professional Audio System 12X12 Dante Media processor Dante Digital Audio Processor with dsp​ 

 

Main Features:

  • USB Background music playback and recording function
  • Support mobile phone, tablet control and distributed cloud control
  • DSP audio processing, built-in automatic mixer, feedback elimination(AFC), echo elimination(AEC), noise elimination (ANC) function
  • Input per channel:Front stage amplifier, signal generator, expander, compressor, 5 stage parameter equalization
  • Output per channel:31 Section diagram equalizer, delay device, frequency divider, limiter
  • Full function matrix remix
  • Built-in automatic camera tracking function
  • Support for scenario presets;
  • Automatic memory protection when power off
  • 1U Whole aluminum chassis
  • Built in Dante Module

 

Description:

 

The MX-0808D audio processor is a freely designed audio processing and control system.It adopts advanced DSP processing technology, has a new automatic mixing, Feedback elimination, etc, targeted to solve various practical problems in the application scene.

Specification:

 

Model No.MX-1212D
DSP ProcessingTi 456MHz FLOPS DSP
Number of analog channels12 Input + 12Output
Number of Dante channels12 Input + 12 Output
Core AlgorithmAutomatic mixing, feedback elimination(AFC), echo elimination(AEC), noise elimination(ANC)
GPIO8 ( Including input and output)
RS232/RS4851
RJ45 control interface1
USB Port1
RJ11 phone interface0
DANTE network interface2
Simulated maximum gain51dB
Digitalizing bit24bit
Sampling Rate48k
Frequency Response(20~20KHz)±0.2dB
Analog-to-digital dynamic range (A-weighted)114dB
Digital-to-analog dynamic range (A-weighted)120dB
Input to output dynamic range108dB
Total harmonic distortion + noise<0.003% @1KHz ,4dBu
Floor noise (A- weighted)-90dBu
Delay storage2s
Analog input to output system delay3ms
Input impedance (balance -type)20KΩ
Output impedance (balance -type)100Ω
Maximum Input Level+18dBu,balance
Maximum Output Level+18dBu,balance
Equivalent input noise EIN(20-20kHz,A-weighted).≤-131dBU
Phantom power (per input)48V
Input common mode rejection,60Hz70dB
Channel Isolation,1kHz104dB
Dimensions (W*D*H)482*258*45(mm)
Weight3Kg
Power Consumption<40W
Operating Temperature-10 - 50℃
Working Power SupplyAC110V-220V,50Hz/60Hz


Devices Overview:

 

Front Panel:

 

Switch on the power and turn it on. When the power indicator lights up, wait for the SYS status indicator to enter the flashing state, then the equipment starts and completes

 

 

①PWR: power light.

②SYS: system status light. The green light flashes after the device is started

③USB: storage devices.( Support MP3 and WAV format U disk recording and broadcasting)

 

Back Panel:

 

 

① Ground screw: The internal circuit of the equipment is grounded through this screw

② POWER interface: connect the 100~220V AC power supply, and a rocker switch.

③ Network control interface: debug and monitor the device by connecting to the network port.

④ RESET: Long press the reset button to restore factory Settings and restart the processor

⑤ RS232+ RS485+GPIO Control Interface: Connect control terminal or central control device to send and receive control command.

⑥ Dante network interface: For accessing Dante audio networks

⑦ Signal output interface: connection amplifier, active speaker and other equipment.

⑧ Signal input interface: connect the microphone, DVD and other equipment.

 

Company Introduction:

 

FHB Audio was established in 2018,who is a technology-based enterprise integrating design, research and development, production, sales, and service, specializing in the production of digital signal processor, digital conference system, Dante products line, microphones, Digital Mixer, power amplifier etc., also can provide customers with a series of according to their requirements, mainly for conference, education, hotels and other application.

 

The company has strong R&D technical strength and advanced production equipment, and has a complete product quality control system. From raw material input to cost delivery, all links are tested and quality tracked, so as to ensure reliable and stable quality.

 

Through unremitting efforts, the scale of FHB has continued to expand, and our company has gathered a group of high-quality, first-class audio technology professionals. So far, our team has more than 100 employees, the product line has increased to 3, and the business is sold all over the world. and have obtained CE, ROHS certificates.

FHB always adheres to the business tenet of "honesty-based", and pursues excellent quality, and constantly improves product quality and after-sales service system to achieve a win-win situation

 

.

 

Hot Products

Built in Dante Moudle 12X12 digital audio matrix mixer network IP audio processor for large system ...
Professional Audio System 12X12 Dante Media processor Dante Digital Audio Processor with dsp​ Main ...
Support IOS,Andorid,web control professional Network dante DSP digital audio matrix audio processor ...
Professional Audio EQ Equipment 16 Inputs 16 Outputs Dante DSP Audio Processor with RS232 and Camera ...
Support RS232 RS485 central control 16CH Dante DSP network audio processor with AEC​​​ Model No. MX...
PA system 8 analog input 8 analog output Dante network DSP audio processor Description: The MX-0808D...