Zhengzhou Sincola Machinery Co., Ltd |
|
Introductions
Wall Coating Spraying Machine is suitable for large and medium-sized commercial and industrial buildings, bridges and steel structures, sprayable medium and low viscosity conventional coatings, interior and exterior latex paints, putty coatings, industrial protective coatings and functional coatings, waterborne coatings, etc. High pressure airless spray high efficiency, the surface fine and smooth, strong adhesion, paint loss and less construction, machinery, ships, furniture and other industries widely used.
Parameter:
Model | T600-S |
Capacity | 500-600 m2/h |
Motor Power | 2400 W |
Voltage Frequency | 220v / 50Hz |
Spray Distance | 500-700 mm |
Output Pressure | 25 N/S |
Nozzle Size | 8mm |
Application | Putty, latex paint, floor paint, tile, steel, fire retardant paint, etc. use is very good, relatively poor quality paint suitable for high viscosity paint, asphalt paint. |
Features:
1, Improved Ceramic Pump
Improved ceramic material piston rod and cylinder improve the
anti-friction effect.The imported leather V-packing also provide
the machine longer lifetime.
2, Exclusive Brushless DC Motor
Brushless DC Motor-Never change brushes with this maintenance-free,
which make the machine work efficiently no matter low or high
speed.
3, Easy out manifold filter
Easy out manifold filter will reduce the tip clogs. The pump filter
could be disassembled by hand easily.
4, Smart Pressure Control system
Latest pressure control system delivers a consistent spray fan at
all spraying pressure.And with digital display, you can read and
regulate the pressure easily. The microprocessor will generate the
fast response when spraying.
5, Stainless Steel Rack.
Stainless steel Rack makes the machine firm stand
Advantage:
First, very high painting efficiency. Spraying efficiency of up to
500-1200 square meters per hour, is more than 10 times the
traditional roller construction, air compressor spraying more than
3 times.
Second, excellent surface quality. Spray coating smooth, Guanghua,
dense, brushless marks, rolling marks, and particles.
Third, extend the coating life. High pressure airless coating can
make the paint particles into the wall of the gap, so that the film
also formed a mechanical wall bite, enhance the adhesion of paint
to extend the service life.
Fourth, easy to overcome the corner, the gap and uneven parts
difficult to brush
Fifth, save paint. In the use of brush thickness is extremely
uneven, generally 30-250 microns, the paint utilization rate is
low, and no air spray is easy to get the thickness of 30 micron
coating, the relative saving paint 20-30%.
Sixth, no air spray can use the extension rod, ranging from 50cm to
5m, can be docked to achieve the separation of the human body
nozzle. Do not have to climb to be able to spray 5-meter-high wall,
while reducing the paint on the human body damage.
Pictures: