Horizontal Dry Mortar Production Line Automatic Road Marking Paint Making Machines

Horizontal Dry Mortar Production Line Automatic Road Marking Paint Making Machines

Product Descriptions of Road Marking Paint Mixing Machines:

1. Hot-melt water-based reflective paint production line with uniaxial no gravity mixing machine ,stir with multi-layer spiral belt , mixingspeed is fast , overall movement of materials, high speed and high yield, the average mixing time is 5 -10 minutes;

2. Multi-usage, can produce solvent at room temperature, heating solvent traffic coatings road marking paint, hot melt type reflective road marking paint, spike type vibration reflective marking paint, water-based reflective road marking paint, etc;

3. Low maintenance rate , the bearing on both ends of the mixer, materials are not easy to enter, reducer equipped with low maintenance rate;

4. High mixing uniformity, multidirectional movement of materials, multi-layer spiral belt, stirring without dead Angle, high uniformity and good quality;

5. Small footprint, Artificial or automatic feeding device according to customer demand, improve work efficiency;

6. Uniaxial no gravity mixing machine structure, stable operation, low noise, long service life and wide application scope, no dead Angle, fast mixing speed and high evenness;

7. The marking paint production line adopts the screw lifting / bucket elevator to raise the material, the feeding port and the ground level are smooth, the feed is convenient.

Technical Parameters of Dry Mortar Production Line:

Advantages of road surface marking paint making production line:

1. Good dispersion: the design of spiral ribbon structure is adopted in the marking paint mixer, which can effectively disperse various raw materials and completely solve the problem of segregation caused by the different proportion of materials.

2. Wide application: hot-melt reflector line paint production line can meet the production of different marking coatings

3. The equipment investment is less, the benefit is high, and it avoids the idle and waste of equipment caused by over-investment.

4. The single shaft non-gravity mixer is used to quickly stir and uniformly, with high precision automatic measurement, batching and oil injection device. Automatic weighing air flow valve mouth packing machine greatly improves working efficiency.