Active Member
|
[China]
Address: Shenglong Office Building, High-tech Zone, Zhengzhou City, Henan Province
Contact name:sales
Henan Mind Machinery Equipment Co., Ltd. |
|
|
Product Introduction:
Rotary Sand Dryers are one of the typical applying area of rotary dryers due to its reliable performance, high efficiency and low manufacturing cost. Our factory has been making rotary dryers for drying sand since 1950s. Back then only single-pass rotary dryers were available for all drying processes. As entering 21st century, all industries facing more and more environmental challenges and higher demand for energy efficiency. Our factory started to R &D Triple-pass Rotary Sand Dryers in 2002, which now has basically replaced conventional single-pass rotary dryer in sand drying plants.
Technical Parameters:
| Model | Φ2.0×4.0m | Φ2.5×6.4m | Φ3.2×7m | Φ3.6×8m |
| Outter Cylinder (m) | 2.1 | 2.5 | 3.2 | 3.6 |
| Outter Length (m) | 4.5 | 6.4 | 7 | 8 |
| Cylinder Volume (m3) | 18.84 | 31.89 | 56.26 | 64.3 |
| Cylinder Speed (r/min) | 4-6.5 | 4-6.5 | 4-6.5 | 4-6.5 |
| Max. temperature inside | 700-750℃ | 700-750℃ | 700-750℃ | 700-750℃ |
| Capacity (T/h) | Yellow sand 18-25 | Yellow sand 28-30 | Yellow sand 35-40 | Yellow sand 65-70 |
| Slag 13-18 | Slag 25-28 | Slag 40-45 | Slag 60-65 | |
| Weight (T) | 15 | 20 | 33 | 42 |
How Does lt Work?
Triple Pass Rotary Dryer has 3 drying zones in the 3 cylinders(intermal one, middle one and extermnal one) which constuct therotating body. Heat processing of a product Mith hign moisturecontent is done eficiently in those 3 doing zones me product isput in from the inlet of thie hoper, sent to the intemal cyinderwhere heating ofthe product s made. then moves tO he middlecylinder where evaporation al moisture is promated iurther. Thesolid constituent of the produd is gradually broken into pieces anddischarged from the outlet via the third final drying zone. The hotair produced in the furnace is sent to the internal cylinder, passeshrough ne middle and extemal cyinders. The hot air is then sentto the cyclone where dust is removed.
Features of Triple-pass Rotary Sand Dryers:
⇒ Thermal efficiency improved by 40%
⇒ Coal consumption (as fuel) is 30% of conventional dryers.
⇒ Outer shell temperature reduced to less than 60 oC; exhaust gas
below 120 oC. filter bags can work twice longer and no need for
cooling. ⇒ Floor area reduced by 40% to 60% by comparison
⇒ Lowered investment for the same capacity.
⇒ Improved sealing and improved reliability.
