5 - 8 T/H Dry Mortar Production Line For Wall / Floor Tile Adhesive Mortar

5-8T/H Dry mortar wall plaster powder machine dry mortar production line

Description:

The semi-automatic dry mortar equipment is a dry mortar equipment, which is made of high-quality steel plate. The internal mixing system is a double fixed fan-shaped stirring blade and can be replaced. It is mandatory to stir during work, and there is no dead angle in the working cabin, which realizes the uniform dispersion of various fibers and additives in the mortar. The device is easy to operate. Easy to master. It adopts one-way feeding and lifting, does not need basic fixing, low noise, and can be equipped with pulse dust collector. It can not only recover the materials lost by dust, but also purify the working environment. It is an environmentally-friendly dry mortar mixing equipment selected by medium-sized building materials enterprises.

Parameter about mixer:

Production line operation guide:

1. Read the instructions carefully before starting up. Confirm that the direction of rotation of the motor such as hoist, mixer, pulse dust collector and valve mouth scale is correct. Check whether the switch button of the pneumatic valve of the mixer is misaligned, whether there is any foreign matter in the warehouse, and the production can be started without confirmation.
Note: If the motor of the valve port filler is rotated in the wrong direction, it will not be packed properly.
2. Start the first step. First turn on the main control switch of the control cabinet to turn on the computer system, preheat it for ten minutes, turn on the air compressor to raise the air pressure to the rated air pressure, and then add the ingredients ratio (recipe) of various raw materials. , (semi-automatic model) The first batch of materials is completed, the operator needs to open the metering conveyor button to make the raw materials enter the mixer through the bucket elevator to mix, and the mixing time of 2-3 minutes can reach the uniform requirement to start mixing. The machine discharge button is discharged to the finished product warehouse, and the operation is repeated. It must be noted that each batch is completely in the next step before the second step can be performed.
Note: If the raw material with a large specific gravity such as quartz sand is put into the inlet of the hoist, it should be gradual and cannot be slammed in order to avoid jamming the hoist.

Installation site:

Packaging and delivery: