410 Stainless Steel Torx Round Washer Head PT Thread Screw for
Thermoplastics
The PT thread screw features a compound geometry of the flank angle
of the thread. Improvements include better deformation of the
plastic material during the fastening process, increased service
life of the joint both in case of static and dynamic stress. Up to
50% improved torsional and tensile strength for the same diameter
fastener. The optimized pitch provides a higher clamp load at low
contact pressure by increased flank engagement.
Stainless steel 410 is harder after being case-hardened than
stainles 300 series steel, can drill into harder plastics.
Star drive is torx compatible, designed to reduce the risk of
cam-out.
Specification
Grade | SS 410, Case Hardened |
Finish | Plain or Passivated |
Head Type | Round Washer Head |
Drive Type | Torx/Star Drive |
Diameter | K14 ~ K60mm |
Length | 3mm ~ 50mm |
Standard | PT, WN1451 |
Stock | Unavailable |
Contact
If you are interesed in our stainless torx round washer head PT
thread-forming screw, please send us email (click on following email address) or call us directly. Best solution or suggestion must be provided in 24 hours.
Tony Xu |
Email | info@drolee.biz |
Mob/Whatsapp | +8618658407226 |
Skype | sales_drl@hotmail.com |
Website | www.drolee.biz |