Pin Point Surface Injection 7in PPI Retrievable Packer For Well Testing

Pin-Point Injection Packer PPI Retrievable Packer For Well Testing
 
The Pin-point Injection Packer is a retrievable test, treat, squeeze, straddle packer. which is designed with a minimum of 1 ft spacing. The 1-ft spacing helps to ensure that the maximum number of perforations within a long producing interval can be broken down to uniformly accept stimulation fluids. It has a bypass located just below the treating ports between the packers. A straight J-slot drag-block body is standard on the PPI Packer.
 
The PPI Packer can be ordered as an assembly or as a conversion kit. The conversion kit contains many of the parts required to convert an RTTS Packer to a PPI Packer. You will also need additional RTTS Packer rings and the spacer ring required for the upper packer element. Adapters are provided to run 2 7/8in. EUE tubing for spacer if intervals greater than 1 ft are required. A retrievable plug is also included with the conversion kit.
Typically the PPI packer will work in tool string with Fluid control valve and RTTS circulating valve.
 
Technical parameter 
 

 
Specifcation of Pin-Point Injection Packer
 

 
Remark: This type of Packers has very detailed casing range, Convert kits are available to convert a packer to run
other casing range by replacing the rubber elements, Guide ring and Drift guide.
Other sizes are available by request.