|
[China]
Trade Verify
Address: No.B-2507, DongWeiCheng, GuanZhuang, Chao Yang District, Beijing 100024, P.R.China
Contact name:Alex
Glorytek Industry (Beijing) Co., Ltd. |
|
Verified Suppliers
|
|
|
Drilling Mud Pump BW160 Three Cylinder 7.7kw Diesel Engine Driven
The BW160 drilling mud pump is a horizontal three- cylinder
single-acting reciprocating piston pump, which is mainly used to
supply flushing fluid to the borehole during drilling process.
The mud or clean water should not have corrosive chemical
impurities to the pump metal and oil resistance rubber while
discharging. The pump has a relatively uniform flow rate and small
pressure fluctuations.
It adopts a two-speed variable speed structure to obtain two
displacements and corresponding two pump pressures. The pump body
is made of aluminum alloy, so the overall size is small , light
weight and good decomposability, which is convenient to carry in
mountain area.
Due to the continuous improvement of the mud pumps produced by our
factory, the content introduced here may be slightly different from
the actual situation, please pay attention to it when using it.
| BW160 Drilling Mud Pump | ||
| Type | Horizontal three cylinder reciprocating single acting piston pump | |
| Cylinder Liner Dia (mm) | 65 | |
| Piston Stroke (mm) | 70 | |
| Speed level | I | II |
| Strokes Per Minute | 245 | 190 |
| Pressure (MPa) | 1.5 | 2.0 |
| Flow Rate(L/min) | 160 | 130 |
| Power (kW) | 7.7 | |
| Suction pipe dia.(mm) | φ51 | |
| Drain pipe dia.(mm) | φ25 | |
| V-belt section | 1448mm | |
| Input speed | 754r/min | |
| Power | ||
| Type | Diesel Engine | Motor |
| Model | ChangchaiR190A ( water cooling) | Y132S-4-B3 |
| Rated power | 7.7KW | 5.5KW |
| Rotating Speed | 2300r/min | 1440r/min |
| Weight (kg) | 200kg | |
| Overall Dimension(L×W×H) (mm) | 1200x550x580 | |
Packing: Standard Packing
Delivery: Normally 10 days after your down payment.
Glorytek Industry ( Beijing) Co., Ltd is a professional manufacturer and supplier of drilling equipment and drilling tools with over 20 years experience. We are supported and assisted by highly experienced R & D team and engineers that enable us to complete all the assigned projects successfully as per clients’ requirements.
Q: Are you a factory or a trading company ?
A: We are an integrated corporation specialized in manufacturing
and exporting.
Q: What is your payment terms?
A: We can accept T/T,L/C.
Q:.What is your MOQ?
A: No requirement for testing and trial order
