If you need our products, contact or check on line.
Or email me directly:3123981177@163.com
- Technique description and performance:
- TST-300 Drilling rig are designed with air, mud and air hammer
drilling. It is applicable for seismic prospecting in complex
stratum area such as Gobi, desert, river bed and gravel etc. Mainly
uses imported components. It is mounted on 6X6 off-road chassis
with steady performance, low maintenance cost and easy to
operation.
- It can carry out liquid normal circulation, air normal circulation
and non medium (auger drilling) many drilling methods.
- Adopts full hydraulic drive, central control, facilitate operating
and reliable.
- Power takes from the chassis engine. After changing in transfer
case, power of chassis engine will be sent to hydraulic system.
- Mud pump and air compressor uses the same hydraulic system.
Controlled by hydraulic valve. Install un-directional valve on air
pipeline to prevent mud getting into air compressor system.
- Drilling rig system works by two hydraulic variable pump work
through series-parallel connection. Power swivel uses double speed
motor driving with big rev and torque scope. It has a broad
applicability.
- Top-driving improves drilling efficiency highly. End frame at end
part is leveled through hydraulic system.
- Pulldown speed control system of drilling rig has the function of
self-adapting to stratum. It doesn’t need manpower non-stop
operating down hydraulic level. Drilling system can carry out
possible max speed to do drilling according to stratum situation.
- Specially designed two pieces of hoisting chains auto equalizer can
improve the system’s security and reliability. Drilling rigs meet
QHSE requirements.
- Chassis chosen for drilling rig include: Tiema China, THE YOUNG MAN
TRUCK, China or Benz.
- Main technical parameter of drilling rig:
- Optimum working ambient temperature: -10~40℃.
- Optimum working altitude height: lower than 2000 meters.
- Drilling method: air/air hammer drilling & water drilling
- Working rev: 1600r/min (drilling rig system) and 1750r/min
(circulation medium system)
- Max drilling depth: air drilling and air hammer drilling: 120
meters & water drilling: 300 meters
- Drilling tools
Drilling pipe: Φ60×6100mm
Drilling bits: 3-1/2” to 7-1/2”
- Power swivel:
Max output torque: 6350 N.m
Output rev: 0~300 r/min
Velocity ratio: 2.16 (67/31)
- Pull-down & pull up system:
Pull-down force: 24kN
Pull up force: 82.5 kN
Pull up speed: 0~0.85 m/s
Auto drilling down speed: 0.45 m/s
- Hydraulic system: working pressure: 25/20.5/20.5 Mpa.
- Air compressor
Displacement/pressure: 12.5 m3/min /0.8 Mpa
- Mud pump
Model 1000/40 duplex double action piston type
Max. pressure 4 Mpa
Rated displacement 1000 Liter/Min
- Mast: door type truss structure
- Chassis (made in China)
Truck type: Tiema (TM)
Drive type: 6X6
Engine power (kW/rpm): 225/2200
- Drilling rig overall dimension(mm): about 11185×2500×3850
Drilling rig weight (kg): about 22000
If you are also interested in other drilling rigs see http://www.drillingrigts.com/
Contact Ms.Ann http://www.drillingrigts.com/contact.html