|
[China]
Trade Verify
Address: Xiaoshang Village,Jinzhou City,Hebei province,China
Contact name:Anna
Jinzhou City Shitan Machinery Equipment CO. LTD. |
|
Verified Suppliers
|
|
|
Diamond Core Drilling 150 Meters Depth XY-1A Hydraulic Borewell Drilling Rig Machine
XY-1A Hydraulic Borewell Drilling Rig Machine Introduction
With hydraulic feeding device, elevated drilling efficiency, reduced labor strength. The rig is equipped with an upper spherical jaw holding mechanism and hexagonal kelly which can be replaced without shutdown, high efficiency, safe and reliable.150 meters drilling depth ,150mm hole diameters.
XY-1A Hydraulic Borewell Drilling Rig Machine Techs
| XY-1A Hydraulic Borewell Drilling Rig Machine | |
| Drilling depth | 150m |
| Drill rod dia. | 42mm |
| Initial hole dia. | 110mm |
| Final hole dia. | 75mm |
| Angle range | 90°-75° |
| Dimensions(L×W×H) | 1640×1030×1440 (mm) |
| Weight(without power unit) | 500kg |
| Swivel Head | |
| Spindle speed(3-speed) | 142/285/570 r/min |
| Spindle stroke | 450mm |
| upward displacement speed of idling vertical spindle | 0.05m/s |
| Downward displacement speed of idling vertical spindle | 0.067m/s |
| Spindle pull-down max | 15KN |
| Spindle lifting capacity max | 25KN |
| Hoist | |
| Max .lifting capacity(1-speed,single rope) | 10KN |
| Cable volume (number) of hoisting drum | 27m |
| Wire rope dia. | 9.3mm |
| Mud Pump | |
| Model | Horizontal reciprocating single-acting piston pump |
| Displacement max | |
| Equipped with diesel engine | 95L/min |
| Equipped with motor | 77L/mm |
| Allowable working pressure max | 1.2Mpa |
| Continuous working pressure | 0.7Mpa |
| Suction pipe dia | 32mm |
| Discharge pipe dia | 25mm |
XY-1A Drilling Rig Machine Advantages
* It has a hydraulic automatic feeding mechanism to improve
drilling efficiency and reduce labor intensity.
* It adopts the ball card clamping mechanism instead of the chuck,
and can implement the non-stop bar, easy to operate, safe and
reliable.
* The hoist is equipped with a frame to form a double-sided support
star structure that can withstand strong impact.
* Four sets of bearing positioning of the vertical axle box ensure
that the gyrator has sufficient rigidity to deal with complex
geological conditions such as gravel layer and pebble layer.
* This machine adopts a taper clutch, which has the characteristics
of large transmission torque, convenient operation and
maintenance-free.
XY-1A Drilling Rig Machine Application
1. With hydraulic automatic feeding device, elevated drilling efficiency.
2. The holding mechanism with upper spherical jaws is used as substitute for chuck. The rod can be replaced without shutdown.
3. Centralized handles, easy operation, safe and reliable.
4. The drilling machine, pump and diesel engine are installed on a common base frame in order to have a compact structure and occupy small field area.
5 lightweight, high detachability, easy transportation and suitable for the operations in plains or mountain areas.
How can we do a good job in the maintenance of well drilling rig?
1. Pay attention to check whether the bolts and nuts of water and gas pipelines and various accessories of the drilling rig are firm at any time
2. . Always check the lubricating oil condition of the wind motor
3. . When the working face is immersed in water, a large-diameter drill head shall be used to insert the drill pipe when opening the hole, so that the drill pipe is 1-2 meters above the water surface to prevent mud and rock slag from falling into the hole
