Crawler Type Pneumatic Water Well Drilling Rig 400 Meter Water Well
Drilling Machine For Sale
ST 400 Pneumatic Borewell Machine Product Information
Full hydraulic drilling rig mainly used to drilling
wells,irrigation wells,ground source heating pump wells and
boreholes for other purposes,especially for mountain and rock
formation well projects.The rig can be drill in different
layers.deep water well drilling rig uses full hydraulic control,
and the top drive to drive the rotation of drilling tools with very
high drilling efficiency.reasonable overall layout uses the
tractor-mounted or full ground challis for transportation with good
maneuverability.Very flexible in difficult roads and can be widely
used in many fields such as resource exploration of hydrology
wells, coal bed methane, the shallow layer of shale gas,
terrestrial heat, etc, and can also be used for coal-mine gas
exploitation salvage work.The top mounted driving head principal
shaft has a great drift diameter, suitable for many kinds of
construction work such as slurry drilling, air drilling, and air
foam drilling, meeting the demands for well-drilling at different
terrain strata..
ST 400 Pneumatic Borewell Machine Main Technical Data:
Product Name | Shitan ST 400 |
Max drilling depth | 400 Meters |
Drilling diameter | 105-325 mm |
Air pressure | 1.2-3.5mpa |
Rod length | 3 meter |
Rod diameter | 89-102-114mm |
Main shaft pressure | 5T |
Lifting force | 25T |
Power head stroke | 6.6M |
Max rotary torque | 12000Nm |
Max rotary speed | 100r/ rmin |
Secondary winch liftng force | 3T |
Jacks stroke | 1.5m |
Moving speed | 2.5km/h |
Uphill angle | 21°Slope |
Weight of the rig | 8.8T |
The engine | 92KW / 6 cylinder |
Overall dimensions | 3900*1600*2350mm |
Working condition | Loose layer and bedrock |
Drilling method | Hydraulic rotary, down-the-hole impactor |
ST 400 Pneumatic Borewell Machine Features
1. It improves drilling efficiency and reduces labor intensity With
hydraulic automatic feeding mechanism.
2. It can be achievedwithout stopping to change rods, easy to
operate, safe and reliable with ball clip holding mechanism
orhydraulic chuck.
3. It hashole bottom pressure gauge to be easy to master the
situation in the hole.
4. It also has advantage of Compact structure,concentrated handle,
small footprint, light weight, strong decomposition, easy tomove.
It can be operated in plains and mountainareas.
ST 400 Pneumatic Borewell Machine Advantage
1.Easy and flexible full hydraulic control
The rig's speed, torque, thrust axial pressure, reverse axial
pressure, thrust speed, and lifting speed can be adjusted at any
time to meet the requirements of different drilling tool working
conditions and different construction processes
2.Top-drive slewing propulsion lift
It is easy to connect and disconnect the drill pipe, shorten the
auxiliary time, and also facilitate drilling with the pipe.
3.Multifunctional drilling
Various drilling processes can be used on this rig, such as:
down-the-hole drilling, through-air reverse circulation drilling,
gas lift reverse circulation drilling, cutting drilling, roller
drilling, tube drilling, and Core drilling under development and
more.The drilling rig can be equipped with mud pumps, foam pumps
and generators according to user needs. The rig is also equipped
with various hoists as standard.
4.High efficiency
Due to the full hydraulic and top-drive slewing propulsion lifting,
it is suitable for various drilling processes and various
drilling tools, with convenient and flexible control, fast drilling
speed and short auxiliary time, so the operation efficiency is
high.
5.low cost
DTH drilling is mainly based on DTH drilling technology. DTH rock
drilling has high efficiency and lower cost per meter.
6.High outrigger and Tracked walking
The high outriggers are convenient for loading and transportation,
and can be loaded directly without crane. Tracked walking is more
suitable for muddy field movement.
7.Positive and negative axial pressure adjustment
The optimal impact efficiency of each impactor has its matching
optimal shaft pressure and speed. During the drilling process, as
the number of drill pipes increases, the axial pressure on the
impactor also increases. Therefore, the positive and negative axial
pressure valves are adjusted during construction to ensure that the
impactor can obtain a more suitable axial pressure. At this time,
the impact efficiency is higher.
8.Rig chassis
It can be a tracked self-propelled chassis or a vehicle-mounted
self-propelled chassis.9.High configuration
The main components and hydraulic system are all famous brands. In
addition, the main frame of the rig is made of high-quality
high-strength low-carbon alloy steel, which increases the overall
strength and is very resistant to wear.
10.Diesel engine
This drilling water machine adopt 65KW Quanchai engine
11.Lifting force
design composite tower, 3.4m long stroke, double cylinder lift
capacity 15 ton .