Customized Crawler Undercarriage Rubber Track Chassis For Drilling
Machine
Crawler Track Undercarriage brief introduction
truck mounted water borehole drilling equipment for 150meter depth
crawler chassis small well drilling rig with 150m deep
The chassis use the rubber tracks,light weight can reduce the voice
from the vehicle moving and reduce the vehicle bidy vibration,then
can reduce the fuel consumption,it can walk on the city road and
doesn't hurt the road.The chassis comes with hydraulic legs,can use for rig
leveling,loading and unloading,it can also be used as ancillary
support when machine working.
Technical Parameters of ST-100 Drill Rig:
1.Overall parameters |
Drilling depth | 150m |
Maximum open hole caliber | 300mm |
End hole caliber | 75mm |
Diameter of drill rod | 42mm |
Drilling angle | 90~75 |
2. Vertical shaft | |
Rotating speed | 142, 285, 570 r/min |
Feeding stroke | 450mm |
3.Hoist | |
Max. single line hoisting capacity | 1600Kg |
Diameter of wire rope | 11mm |
4.Mud pump | |
Type | Horizontal single urn twin-action |
Rate of flow | 95/77L/min |
5.Power | |
Diesel engine | 18HP, 2000r/min |
Electrical motor | 11KW, 1460r/min |
Main features:
1.It improves drilling efficiency and reduces labor intensity with
hydraulic automatic feeding mechanism.
2.It can be achieved without stopping to change rods, easy to
operate, safe and reliable with ball clip holding mechanism or
hydraulic chuck.
3.It has hole bottom pressure gauge to be easy tp master the
situation in the hole.
4.It also has advantage of compact structure, concentrated handle,
small footprint, light weight, strong decomposition, easy to
move.It can be operated in plains and mountain areas.
The feature of rubber tracks:
(1). Less round damage
Rubber tracks cause less damage to roads than steel tracks, and
less rutting of soft ground than either steel tracks of wheel
products.
(2). Low noise
A benefit to equipment operating in congested areas, rubber track
products less noise than steel tracks.
(3). High speed
Rubber track permit machines to travel at a higher speed than steel
tracks.
(4). Less vibration
Rubber tracks insulate machine and operator from vibration,
extending the machine's lifetime and lowering operate fatigue.
(5). Low ground pressure
The ground pressure of rubber tracks equipped machinery can be
fairly low, about 0.14-2.30 kg/ CMM, a major reason for its use on
the wet and soft terrain.
(6). Superior traction
The added traction of rubber, track vehicles permits them to pull
twice the load of wheel vehicles of the sane weight.