Shaanxi Aipu Solids Control Co., Ltd |
1. Drilling fluid from drill hole will feeding into shale shaker
buffer box by pipeline, the shaker can install shaker screen mesh
API 35 to API 120 to separate larger drilling cuttings. Fluids part
will drop into sand trap through mesh screen panel.
2. drilling mud from sand trap will over flow into next compartment
and vacuum degasser will suction mud to degasser and treated mud
will overflow into degasser compartment.
3. Desander feeding pump will suck mud from degasser compartment
and feed into desander cyclone for 47 – 76 micron separation.
Solids part will drop from desander nozzle and fluids over flow
into desander compartment.
4. Another will pick up mud from desander compartment and feed
desilter cyclone, solids part drop through desilter nozzle and
fluids over flow into desilter compartment.
5. Submersible slurry pump or screw pump then transfer mud from
desilter compartment into decanter centrifuge for 2 – 7 micron
separate and clean mud flow into centrifuge compartment
6. All tanks compartment after desilter compartment we name as
clean mud, mixing pump can suction or discharge to any of the clean
mud tank for mud transfer or new mud mixing.
Rig | 350-450HP | 550-650HP(ZJ20) | 750HP(ZJ30) | 1000HP(ZJ40) | 1500HP(ZJ50) | 1500HP(ZJ50) |
Mud Flow(m³/h) | 90 | 120 | 180 | 240 | 240 | 300 |
Shaker Qty | 1 | 1 | 2 | 2 | 2 | 3 |
Mud Cleaner | 1 | 1 | 1 | 1 | 1 | 1 |
Centrifuge | 0 | 0 | 1 | 1-2 | 2 | 2 |
Separation Size | 20 micron | 7 micron | 7 micron | 2 micron | 2 micron | 2 micron |
Mud Tank Qty | 2 | 3 | 3 | 5 | 6 | 7 |
Mud Tank Size | Customized | |||||
Pipeline Arrange | Customized |
Oilfield Drilling Mud Tank System For Drilling Mud Mixing And
Storing
Oil well drilling mud solids control system is very important for drilling efficiency to enhance and cost-save. Whole drilling mud system including the shale shaker, degasser, mud cleaner, centrifugal pump, decanter centrifuge, mud agitator, mud gun, jet mud mixer, mud tanks, and the mud gas separator.
We, Aipu solids control not only keep innovating the leading drilling mud purification technology, but we put them into production. In the manufacture of products: we are strict with the process and technology based on the quality management system standard. We have various production equipment to ensure product quality stability according to the product requirements. In testing the product: We use advanced detection equipment for product testing with the provisions of the international industry standards, and serious tests to ensure that all products are qualified before leaving the factory. Moreover,our drilling mud purification system technology is oilfield projects proved. Many of our customers repeat their solids control service from us.
Customized drilling mud purification system.
Benefits of Low Solids In Drilling Mud.
Increased drilling penetration.
Increase bit or back reamer life.
Different drilling rigs may request different solids control system
configuration. From shale shaker to centrifuge, from active tank to
trip tank, there are many flexible design on whole system.
Aipu solids control system is optimal solution for you to process well drilling fluids. From the shaker, cleaner, to centrifuge; from shaker screen, spring, to valves spare parts. Please refer to Aipu site or call us for detail configuration