Active Member
|
[China]
Contact name:Miranda
Shaanxi Aipu Solids Control Co., Ltd |
|
|
Mud gas separator (MGS) is commonly called a gas-buster or poor boy
degasser. It captures and separates large volume of free gas within
the drilling mud. If there is a “KICK” situation, this vessel
separates the mud and the gas by allowing it to flow over baffle
plates. The gas then is forced to flow through a line and vent it
to a flare. APMGS series mud gas separator combined with the
flare ignition device can be used to ensure drilling process
smoothly.
AIPU Solids control is a professional manufacturer of liquid gas
separator. AIPU supply 3 models of MGS with 800mm, 1000mm and
1200mm diameter tank vessel. The model selection can be done as per
mud flow capacity requirement or budget requirement.Some clients
requires only MGS and some require MGS and flare ignition device
both depending on drilling conditions. If no flare ignition device,
the gas vent line on MGS will be set on vessel top with meters of
gas vent line to allow separated gas discharge out.
| Model | APMGS800 | APMGS1000 | APMGS1200 |
| Vessel Dia. | 800mm | 1000mm | 1200mm |
| Flow Rate | 200-260m³/h | 240-300m³/h | 280-360m³/h |
| Inlet | 5'' | 5'' | 5'' |
| Discharge line | 8'' | 8'' | 10'' |
| Vent line | 8'' | 8'' | 8'' |
| Weight | 1600kg | 2100kg | 2800kg |
| Overall Dim. | 1900x1900x5700mm | 2000x2000x5860mm | 2200x2200x6634mm |
Mud gas separator will work with flare ignition device to burning the discharged gas 30 or longer distance away. The flare ignition device will connect with degasser with gas vent line, the flare ignition device is non return valve, ignitor, junction box and control panel with cable. AIPU Solids Control is one of the leading manufacturer for mud gas separator, flare ignition device as well as other drilling mud process equipment like vibrating shaker, mud cleaner with cyclone and shaker, centrifuge, etc.
1. MGS will set beside shale shaker tank and connected with shaker
distribution tank to allow treated mud goes into shale shaker for
solids separation.
2. Mud comes out of chock manifold will goes into MGS directly for
gas separation.
3. The footprint of a MGS is 2 meters by 2 meters with a stand to
hold tank vessel. The stand design can be changed and supply to
client as per request to allow degasser fold down on to a skid.
4. A flare ignition device can be selected to sit 30 meters away of
degasser to burn the waste gas out of MGS.
AIPU Solids Control build mud gas separator as well as other
drilling mud equipment to supply a complete drilling mud process
equipment. Please visit our website freely for inquiry.
Mud gas separators in other countries also called Poor boy
degasser,Liquid-gas separators,Mud/Gas Separators, etc.
Aipu Solids Control designs and manufactures APMGS Mud
gas Separators. Mud gas Separators is an extremely reliable, vital
piece of safety equipment for today’s drilling operations. It is
ideal for use where drilling is likely to encounter large volumes
of gas, sour gas or when an operator is drilling with an under
balanced mud column. This Mud gas Separators is primarily used to
separate and safely vent large pockets of free gas, that may
include toxic gases such as hydrogen sulfide, etc
Aipu have focoused on solids control about 20 years, and have a professional technical team
Aipu offer high quality products at competitive price
AIPU products are appreciated by clients because of high quality at reasonable cost.
Most of our equipment can be replaceable with international brands.
Shortest delivery time. Flexible payment terms. And timely
after-sale service
For any question or demand, just feel free to contact AIPU solids, and you will get a professional proposal .
