Active Member
|
[China]
Contact name:Miranda
Shaanxi Aipu Solids Control Co., Ltd |
|
|
Aipu drilling fluids desilter is designed by the theory of particle sedimentation. Which is the third phase solids control equipment to handle the drilling fluids. The separation medium-drilling fluid produces some pressure and speed when it passes the centrifugal pump, and flows into the hydrocyclone along the wall, the bigger solid particles along the wall of hydrocyclone sink spirally under the centrifugal force and gravity, and to be discharged from the bottom flow hole and fall on the under micromeshsieve for separation. The other mediums rise along the spiral of hydrocyclone, flow into the fourth class separation equipment-centrifuge for a further cleaning treatment from the overflow hole
Generally, there are a set of hydrocyclones in 4” or 6” in the desilter, which mainly used for separating the solid particles sized in 15~47μm from the drilling fluids. The desilter cleaner mainly consists of shale shaker, hydrocyclones, distribution manifold, and electric control cabinet and desilter removes the solid particles from the drilling fluids which cannot be removed by shale shaker and desander
| Model | APCN60 | APCN90 | APCN120 | APCN200 | APCN240 | APCN320 | |
| Capacity (m³/h) | 60 | 90 | 120 | 200 | 240 | 320 | |
| Desilter Cone | 4”x4 | 4”x6 | 4”x10 | 4”x16 | |||
| Working Pressure | 0.25-0.4Mpa | ||||||
| Separation Point | 15-46 Microns | ||||||
| Inlet | 6" | ||||||
| Outlet | 8" | ||||||
| Bottom Shaker | Model | Hunter Mini | Hunter D | Hunter MG | |||
| Vibration Mode | Linear Motion | ||||||
| Vibrator Motor | 2x0.75Kw | 2x1.72Kw | 2x1.72Kw | ||||
| G Force | ≤7.5G | ||||||
| Deck Angle | 2° | -1 - +5° | |||||
| Screen Area | 1.35㎡ | 2.27㎡ | 2.73㎡ | ||||
| Screen Panel | 2 Pcs | 3 Pcs | 4 Pcs | ||||
| Dimension(mm) | 1650x1250x1600mm | 2450x1700x1700mm | |||||
| Remark | 4"Cone=12~15m³/h,5" Cone=20m³/h. It can be configured according to
clients' demand. | ||||||
Drilling fluids desilter is the third phase solids control equipments after shale shaker and desander equipments. It is made by desilter cyclone, inlet and outlet pipeline, steel frame and shale shaker for bottom drying.
The desilter is mainly treat drilling mud by desilter cyclone by
centrifugal force. It is popularly use 4” desilter cyclone for
separate solids 15 – 25 microns and above, the majority larger
solids particles was separated by centrifugal force and drop out
from desilter nozzle and fluids content overflow from top outlet
and discharge to tank compartment. There maybe a set of shale
shaker on bottom of desilter cyclone, it is installed in finner
mesh screen for drying solids particles out of cyclone. The mesh
size choose from API 140 to API 325 depending on drilling
requirement. The desilter mud flow can be 500GPM to 1500GPM
depending on cyclone quantity.
APCN series desilter is the third phase solids control equipments in well drilling mud system
Drilling fluids desilter separators are one of the important
equipment of controlling the solids in the drill fluid. The action
is to remove the harmful solids, promote the drill fluid
performance and separate 15～47 μm solids particles accounting for
over 60% of solids quantity.When the quick drilling is made in the
soft formation, the shale shaker only can remove large solids
particles, but the Hydrocylone Desilter separators can remove fine
solids particles, fully promoting the solids control efficiency.
Therefore, it is especially suitable for the well site where the
formation is considerable hard and the drilling speed is slower so
that the cuttings is very fine in particle size.
As different treating capacity , you can choose the number of
cyclone . Normally speaking , 8 no. of cyclone is availeble , and
you can choose 10 , 12 , 14, 16, 18, 20 according to your
requirement.
We, Aipu sollids control is a China exporter of desilter and desander equipments for Indian, Russian,middle east.etc.Choose us as desilter supplier.Our factory and company are Quality Management System ISO 9001-2000 certified.Aipu Solids Control operate international oil gas drilling mud separation system sales,service,manufacturing,distribution serivce.Buy desilter from China manufacturer Aipu,good quality,best price.Your best hydrocyclone desilter for drilling mud circulation system.
We supply other solid control equipment like shale shaker, mud cleaner, decanter centrifuge, jet mud mixer, desilter, vertical cutting dryer and so on. And some configuration is customizable. For any question or demand, just feel free to contact AIPU solids. You will get a professional proposal very soon.
