Beijing Sinovo International & Sinovo Heavy Industry Co.Ltd. |
Verified Suppliers
|
|
48KW SD-200 Mud Purification And Recovery Sand Separator
SD series desander Applications: Hydro Power, civil engineering, piling foundation D-wall, Grab, direct & reverse circulation holes piling and also used in TBM slurry recycling treatment. It can cut down construction cost, reduce environmental pollution and increase efficiency. It is one of the necessary equipment for foundation construction.
1. It can meet the 500- 6000m3/h TBM slurry treatment and recycling
requirements.
2. Adopt the international advanced technology. Modular design,
product customization.
3. The overall structure is reasonable, cover an small area, low
noise, high efficiency equipment, engineering applicability, long
service life.
4. The method of centralized remote control system adopts PLC. Each
point has the automatic fault diagnosis and display function.
5. Use the chemical modified such as lower viscosity, filtration
combined with piecewise filter pressing way, to realize the filter
pressing water to achieve the discharge standard, filter cake water
content is below 25%.
Advantages
1. The oscillating screen has many advantages such as easy
operation, low trouble rate, convenient installation and
maintenance
2. The high screening efficiency of the machine can excellently
support drillers raise bore and advance in different strata.
3. Energy-saving efficiency is significant since the power
consumption of the oscillating motor is low.
4. The thick, abrasion-resisting parts and specially designed
brackets enable the pump to convey corrosive and abrasive slurry
with high density.
5. The specially designed automatic liquid-level balancing device
can not only keep the liquid-level of the slurry reservoir stable,
but also realized the reprocessing of mud, so the purification
quality can be further enhanced.
Technical Parameters
Type | Capacity ( surry) | Cut point | Separation capacity | Power | Dimension | Total weight |
SD-200 | 200m³/h | 60u m | 25-80t/h | 48KW | 3.54x2.25x2.83m | 4800kg |
After-sale service
1.We can design and manufacture the sludge treatment systemand send the technical personnel to guide the installation of equipment at customer's workplace according to the requirements of our customers
2.If there is anything wrong with the products you can contact us in any time ,we'll send the customer's feedback to technology department and return the results to customers as soon as possible
Quantity(Sets) | 1 - 1 | >1 |
Est. Time(days) | 15 | To be negotiated |