Foundation Piling Drilling Bucket , Hard Rock Buckets Vented 600-2500mm Dia

Foundation Piling Tool Double Cut Cleaning Bucket Clean Borehole Bottom High Metal

Clean bucket are applicable for cleaning the dense sand, gravel and rocks in the bottom of borehole.

For use in cleaning material from the hole that augers cannot retrieve. The operator simply put the tool into the hole with the door open, lower to the bottom of the hole making only a few revolutions before placing the machine in reverse to close the door. Because the tool is vented, the operator simply pull the tool up to the top of the shaft, lower the tool to the ground and place drill in forward to open the door.

Clean out Bucket is designed to pull heavy fines and water suspended material from the shaft allowing concrete to be poured.Cleaning the bottom of borehole and removing spoil from holes after drilling to get a clean hole is the work of clean bucket.

Drilling Diameter Range: 600~2500mm

Barrel Length: 800~1500mm

1. Choose cone or straight bucket according to different working conditions.

2. Choose straight guide plate or no guide plate according to different working conditions.

3. Applicable scope: clean spoil at pile bottom, soft layer.

4. High quality raw material.

Applicable: cleaning the dense sand, gravel and rocks in the bottom of borehole.