Henan Dorit Biotechnology Co., Ltd. |
|
Turbina Led Dental Turbine Handpieces
Tips Big Torque Push Head
Dental LED handpiece
big head 4 hole
Dynamic balancing correction
zero-sucton function to prevent cross-seciton
LED light , self illumination
Dental LED handpiece tech data:
Drive air pressure | 0.25-0.3Mpa |
Water pressure | 0.2Mpa |
Water pressure | 198Kpa(2kg) |
Light brightness | 25500lux |
Power | 22W |
Rotation speed | 350,000~420,000rpm |
Head height | 13.0mm |
Head diameter | Φ12.7mm |
Chuck type | Push button |
Clamping force | 22N~34N |
Torque force | 0.1N·cm(small head); ≥0.1N·cm(large head) |
Bur Applicable | Φ1.59mm-Φ1.60mm*21mm-23mm(diameter*length) |
Noise | ≤60DB |
Dental LED handpiece Features:
1. German ceramic ball bearing; open style cartridge.
2.sterilized in 135℃ to avoid cross-infection.
3. high-grade materials with a stylish design.
German cartridge (Imported spindle and bearing)
Instruction:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min. at 135ºC.
Operation Instruction:
It shall be sterilized before handpiece is used at the first time;sterilization temperature is 135ºC and last for 12 minutes.
After using,Please follow the instruction to sterilize the handpiece:
1 extract the bur from the handpiece,use the soft brush to clean the dirt and wash with disinfection of alcohol cotton.
2 lubricate the handpiece,pour two drops into air tube one time.
3 wrap it with sterilization package and mark.