Good Visibility Fiber Optic Handpieces Air Free Head 11mm Dental Surgical Handpiece

Fiber Optic Handpieces Good Visibility Air Free 45 Degrees

Dental Surgical Handpiece

DR-145 Fiber optic handpiece

45 Degree fiber optic handpiece technical data:

DR-145 Fiber optic handpiece

Detailed photos:

Packaging and shipping

1, each item will be strictly checked by QC, providing more care for your items.

2, each carton will be well wrapped and given advance tests in order to make the cargo delivered to your door without any damages.

3,If you need, we can also do your own package & logo printed.

After each patient use , maintenance should be done as follows:

1. First remove the diamond burs , and clean up all the teeth on dental handpieces precipitate

2. Use a metal needle to clean the spray holes and fumaroles

Note: The spray holes and diamond burs into 40 -degree angle , fumaroles and diamond burs to a 30 degree angle

3. Place the clean lubricating oil is sprayed into the axial hole 1-2 seconds ( diamond burs is plugged holes )

4. In the bottom of the handpiece were ( with / without quick connector ) two kinds of styling , make the right amount of lubricant is injected into the bottom

5. The handpiece with quick connector combination ( first determine the water switch is turned off )

6. Replace the diamond burs , surrounded by white silk cloth handpiece head ( make sure the needle does not touch the diamond burs and white gauze , so as not to tie )

7. pedal depressed for about 20 seconds , look at whether there is in white gauze on any stain. If there are stains on the white gauze , again, add oil , starting from item 4 continued routine maintenance , know that white gauze until no stain

8. Finally, no more than 135 degrees Celsius temperature and high pressure sterilization