Active Member
|
[China]
Address: Room D312,Floor 3,Building 3,Jia 2 Jinfu Road,Economic Development-area, Daxing District,Beijing,China.
Contact name:Cathy Wu
State (Beijing) Medical Technology Co., Ltd. |
|
|
Movement Black Intermediate Frequency Massager Relax Muscle Simpler
Product working principle
The product uses a frequency of 1KHZ-6KHZ modulation IF, that is,using carrier-frequency current its strong penetrating characteristics of the modulated wave into the body to achieve the role of in-depth treatment, it is low-frequency modulation of the IF therapy. With analgesia, improve local blood circulation, promote inflammation dissipated, soften scar, loosen adhesions, excite nerve and muscle function.
Cleaning and maintenance
1. The surface of the machine needs wiping by wet cloth (do not use
chemical reagent) to keep clean.
2. Please shut down the power when not in use.
3. Keep the machine in an environment not dusty or exposed to
direct sunlight or it could get the electrodes unavailable.
4. Please use the methods below to use and maintain the batteries:
Parameters
| Battery type | Lithium-ion batteries. |
| Use of environment | temperature 10 ℃ ~ 30 ℃, relative humidity ≤30% ~ 70%. |
| Dimensions | 136 × 70 × 17cm (length × width × height) |
| Weight of the machine | 150 g |
| Structure | mainly consists of the host, the electrode sheet, the output cable and the connection cable.
|
| Input power | ≤5W |
| Batteries capacity | 3.6V / 3500mAh (TYP) |
| The operating frequency | 1 kHz ~ 6 kHz, tolerance ± 10%. |
| The modulation frequency range | within the range of 0-150Hz |
| Amplitude modulation | offers 0%, 33%, 60% and 100% of the four kinds of amplitude modulation, tolerance of ± 5%. |
| The fundamental frequency and waveform | square wave, frequency of 1 kHz ~ 6 kHz |
| Frequency and waveform modulation wave | a squarewave, sharp wave, triangle wave, exponential wave, saw tooth, sine wave, continuous wave, trapezoidal wave, wave the fan, fan ladder wave and combinations thereof |
| The output electric current | in 500Ω load resistor, the output current does not exceed the following limits: frequency ≤1500Hz, to 80mA (rms), frequency> 1500Hz to 100mA(rms) |
| The output current stability | load resistance of 500Ω, the output current change rate should not exceed 10% |
| The output current regulation mode | with keys increment, decrement (50 files, each file 1mA) |
| Continuous working time | every 1000mAh, many massage time 40min |
