|
[China]
Trade Verify
Address: No.25 Gangfu Road, Konggang New District, Longwan, Wenzhou, China
Contact name:Jasmine Zhuang
DONJOY TECHNOLOGY CO., LTD |
|
Verified Suppliers
|
|
|
DONJOY sanitary multi port Diaphragm Valve , multiport valve
Specifications
Product Name: | SS Sanitary Multiport Pneumatic Diaphragm Valve for |
Valve Body Material: | SS316L |
Seal Material: | Single sillcone gasket/ Adhesive PTFE+EPDM/Two pieces |
MaxWorking Pressure: | 10 Bar |
Max.Working Temperature: | 130 degree C |
Availably size: | 1"-3" DN25-DN80 |
Availably connection: | Clamp/weld/thread/special connection |
Availably standard: | 3A/BPE/DIN/ISO/IDF |
Operated: | Manual,Pneumatic |
Availably structure: | Straight, tee, U-type, tank bottom |
Control: | Smart valve positioner / C-TOP control / position sensor |
Certificate: | 3A/54-02 (1580), PED/97/23/EC, FDA.177.2600 |
Application scope: | Dairy,food, beverage, pharmacy, cosmetic, etc |
Instruction manual: | Chinese - English bilingual |
Direction of port: | As per actual situation |
Description
Various configuration of Diaphragm valve
1. Didaphragm valve with
Pisitioner/Process Controller(IL-TOP)
2. Diaphragm valve with Control
Unit(C-Top)
3. Valve position Regulator
4. Position Sensor Module
5. Plastic Handle
6. Stainless steel handle
7. Stianless steel acutor
8. Electric Diaphragm valve
9. Plastic Acutor
10. Body: Casting / Forging
Operating Principles
1. The diaphragm provide the body seal as well as the seat seal. There are no paths to the outside environment, so it suitable for aseptic processes
2. When the valve is closed a pressure pad which supports the diaphragm moves towards the sealing face on the body.When the pressure plate moves the diaphragm flexes and is forced down onto the seat area in the centre of the body thus closing of the flow path through the body.
3. The inter relationship of body to the pressure plate prevents over compression of the diaphragm
4. The valve can be manual operation and pneumatic operation control tops of solenoid valves
Cetificate of Diaphragm valve
1.All synthetic resin and additive are comply with FDA Certification.
2.Material chemical composition, physical properties and manufacturing process are documented.
3.3-a consistency the authentication
4.CE-PED/97/23/EC
5.EN 10204-3.1
Diaphragm of the valve
1. EPDM+PTFE( Adhesive)Diaphragm tablet have high chemical resistance, high stability, good flexibity, long life, high sealing, no code degeneration, and not effected by temperature fluctuations excellent performance, whether it is thermal cycle, cold cycle, or steam disinfection system.
Sepcification: 1-3", DN20-DN80
Temperature :-20 to 120degree
2. EPDM+PTFE (Seperate) It can reduces the diaphragm tolerance and proling the service life of the diaphragm
Sepcification: 1-4", DN20-DN100
Temperature :-20 to 150degree
3 Single seal (EPDM/SILICONE/FPM), Rubber diaphragm embedded a layer of vulcanized fiber layer enhance its mechanical properties, then diaphragm in pressure and temperature hase high seal stability, reinforcing fiber hardening in stainless steel bolt, so as to ensure better rubber and metal bond together. So it is suitable for use in vacuum environment.
Sepcification: 1-4", DN20-DN100
Temperature :-10 to 120degree
4. Mini type diaphragm gasket ( EPDM, SILICONE,FPM, EPDM+PTFE)
Sepcification: 1/4"-3/4", DN6-DN15
Temperature :-20 to 150degree
Surface Treatment :
1.For mechanical polished : Inner Ra＜0.5μm, Outside : From 1-4" Sandblasting, Below 1" with mirror polished
Drawing
Please check the size form below for detailed information.
Tag: Donjoy Valves, Diaphragm valve, BPE Valve
