|
[China]
Trade Verify
Address: 101# Building, JLH605-B01 Greenland International Exp Center,Jiulong Road 1177,Honggutan District,Nanchang,Jiangxi,China
Contact name:Terysa
Nanchang YiLi Medical Instrument Co.,LTD |
|
Verified Suppliers
|
|
|
Dispoable Insulin pen needle 32G 4mm 5 Bevels insulin needles
Size 29G 30G 31G 32G 33G
Product Introduction:
1. Easy to use
2. Single use only, disposable device
3. Safety to handle
4. Easy to read numbers
5. Thin, Fine, Sharp
6. Extra lubricated needle, providers greater comfort
7. Compatible with all available pen models
8. Optimum treatment with maximum simplicity
9. Sterile,Non-toxic,Non-pyrogenic
10.Double point system
Featrue:
Compatible with all available pen models
Optimum treatment with maximum simplicity
Sterile,Non-toxic,Non-pyrogenic
Double point system
Patient Point with triple beveling for easy and atraumatic
Cartridge point sharpened for a perfect punch with no fragmentation
Easy flow of medication without any impurities
Size:
Needle Size | Needle Length | Package | G.W(Kg) | N.W(Kg) | ||
pcs/box | box/carton | |||||
33G | 0.2mm | 4mm | 100pcs | 6.550 | 6.3 | 4.5 |
32G | 0.2mm | 4mm | 6.3 | 4.5 | ||
5mm | 6.3 | 4.5 | ||||
6mm | 6.3 | 4.5 | ||||
31G | 0.25mm | 4mm | 6.3 | 4.5 | ||
5mm | 6.3 | 4.5 | ||||
6mm | 6.5 | 4.8 | ||||
8mm | 6.5 | 4.8 | ||||
30G | 0.30 | 8mm | 4.8 | 4.8 | ||
Detail:
Product name: Insulin Pen Needle
Size:29G,30G,31G,32G, 33G
Needle Length: 4mm - 12mm
Properties: Diabetes treatment
Stock: Yes
Shelf Life: 5 years
Material: PE/PP/Stainless Steel 5 Bevels Painless
Sterilization: EO gas
Certificate: CE or ISO13485
Packing: 100pc/box
Product photo:
How to identify the model of insulin needle?
There are currently many models of insulin needles, such as 4mm ×
0.23 mm (32 G), 5 mm × 0.25 mm (31G), 6 mm × 0.25 mm (31G), 8 mm ×
0.25 mm (31G), 12.7 mm × 0.33 mm (29 G), etc. Do you know the
meaning of representation? 4mm, 5mm, 6mm, and 8mm represent the
length of the needle; The English letter G represents the
thickness of the needle. (The larger the value in front of G, the
thinner the needle)
Usually, the shorter the needle, the higher the safety and the
better the patient's tolerance. The thinner the needle, the greater
the resistance to insulin flow, which slows down the injection
speed. Therefore, a greater injection force is required to achieve
the original injection speed.
Do not litter discarded insulin needles:
The syringe and injection needle after injection are both medical
contaminated sharps, and improper handling can not only harm others
but also cause certain environmental pollution.
Therefore, after the needle is pulled out, it should be immediately
removed from the injection pen, and the needle or syringe should be
placed in a dedicated waste container before being discarded. If
there is no dedicated waste container, it can be replaced with a
covered hard shell container or a container that will not be
punctured by a needle.
Recommendation: 4mm needle is the safest
The length of a 4mm needle is sufficient to penetrate the skin and
enter subcutaneous tissue, and the risk of intramuscular injection
(or intradermal injection) is low. Therefore, for adults and
children of any age, gender, and body mass index (BMI), a 4mm
needle is the safest injection needle.
Selection techniques for different types of patients
Children, adolescents, and patients who are too thin should choose
short needles as much as possible, pinch the skin, and insert the
needle vertically or obliquely to avoid injecting into the muscles.
The safest needle among existing syringes is a 6mm needle, but it
must be pinched. A 4mm needle is safe and effective for obese
patients, and a 5mm needle is also acceptable.
FAQ:
1.Q:Are you a factory or trading company?
A: We are a factory, we have rich experience for manufacturing more than 9 years.
2.Q:Where is your factory located? How can i visit there?
A: Our factory is located in Nanchang city,Jiangxi Province,China.
It is about more than 4 hours from Shanghai airport, We can pick you up if you need, welcome to visit our factory.
3.Q:What is the material for your products?
A: The material is medical grade PVC/pp/Latex/silicone/Stainless Steel
4.Q:Can you make samples?
A: Yes, we can make samples for you.
5.Q:How does your factory do as quality control?
A: Quality is the lift of our factory. We have inspector in different post, and there are three inspectors before packing to get best quality products.
6.Q: How is your after sale?
A: 1.If any damaged rings in the course of carriage, with the checking it's our mistake, we will take full responsibility to compensate the customers.
7.Q: What is the monthly production capacity?
A: Can produce 20000000 units per month.
