Nanchang YiLi Medical Instrument Co.,LTD |
Verified Suppliers
|
|
100ml, 150ml Medical Burette Infusion Set
EasyThru Disposable Burette type Infusion Set have the properties: Easy-holding and easy puncturing spike;
transparent and flexible tube against winding and twisting; nice
regulator which can make the flow rate change from minimum to
maximum.
This device is useful for giving saline to the infants or heart
patient.
1) 100ml or 150ml graduated burette with shut-off valve
2) 60 drops=1±0.1ml
3) Flexible drip chamber with filter
4) Slip or lock adapter with protective cap
5) Latex or Latex-free injection site
6) ABS Spike,air vented with cap,drip chamber with filter, with Y
injection site,luer lock connector, tubing 1.5m/1.8m
7) Medical grade PVC tube,NON-DEHP PVC available
8) Burette made by medical TPE
Optional for customer requirement:
1. With or without air vented spike;
2. With or without Y injection port
4. Luer slip or luer lock
6. with or without backeye
7. 21-25G needle
Packing Information:
Size | Primary Pack | QTY/CTN | CTN Size |
100ml | PE | 100 | 67*38*33cm |
Blister | 100 | 56*42*38cm | |
150ml | PE | 100 | 67*38*33cm |
Blister | 100 | 56*42*38cm |
Ingredients:
Product structure and composition: composed of a protective sleeve,
cork puncture device and intake parts, hanging bottle, air filter,
dropper, drip bucket, hose, flow regulator (valve), liquid filter,
injection parts, and intravenous infusion needle.
Raw materials: The hose is made of polyvinyl chloride (MT02), the hanging bottle
is made of polypropylene (PP), the drip hopper is made of polyvinyl
chloride (MT03), the medicine filter shell is made of polyvinyl
chloride (MT04), the air filter and regulator (wheel) shell is made
of polyethylene, the puncture device is made of acrylonitrile
styrene butadiene copolymer (ABS), the hanging bottle and
protective sleeve are made of polypropylene, the filter membrane is
made of glass fiber, and the infusion needle tip is made of
0Cr18Ni9 (SUS304) stainless steel pipe for medical devices.
Product photo:
FAQ:
1.Q:Are you a factory or trading company?
A: We are a factory, we have rich experience for manufacturing more
than 9 years. Produce medical disposable products in urology,
anesthesia, respiratory, obstetrics and gastroenterology.
2.Q:Where is your factory located? How can i visit there?
A: Our factory is located in Nanchang city,Jiangxi Province,China.
It is about more than 4 hours from Shanghai airport, We can pick
you up if you need, welcome to visit our factory.
3.Q:What is the material for your products?
A: The material is medical grade PVC/silicone/latex/TPU
4.Q:Can you make samples?
A: Yes, we can make samples for you.
5.Q:How does your factory do as quality control?
A: Quality is the lift of our factory. We have inspector in
different post, and there are three inspectors before packing to
get best quality products.
6.Q: How is your after sale?
A: 1.If any damaged rings in the course of carriage, with the
checking it's our mistake, we will take full responsibility to
compensate the customers.
7. Q: What certificates do you have?
A: CE (TUV), FCS, CFDA, FDA, LGA and ISO 13485 are ready for most
models of our products.
8. Q: Which market do you mainly involve in?
A: Main markets of our medical disposables: Middle East, India,
Southeast Asia and the USA.
9: Q: How can we be your agent or distributor?
A: Please advise/confirm which products and which markets do you
expect to market so we can confirm with the status of product
registration and authorization.