|
[China]
Trade Verify
Address: 3 floor,Builiding B,baoke industrial,dalang,longhua,shenzhen,china
Contact name:sarah
Shenzhen Pray-med Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
Hamilton C1 c2 medical oxygen sensor O2 cells for respiratory equipment
Specification:
| Measurement Range: | 0-100 % oxygen |
| Accuracy and Repeatability: | < 1 % vol. O2when calibrated at 100 % O2 |
| Zero Ofset: | < 0.5 % vol. O2in 100% N2, applied 5 minutes |
| Linearity Error: | < 3 % relative |
| Cross Interference: | < 0.5 % vol. O2response to: |
| 10 % CO2balance N2 | |
| 80% N2O balance N2 | |
| 7.5% Halothane balance N2 | |
| 7.5 % Isofurane balance N2 | |
| 7.5 % Enfurane balance N2 | |
| 9% Sevofurane balance N2 | |
| 20% Desfurane balance N2 | |
| Infuence of Humidity: | - 0.03 % rel. per % RH at 25C |
| Infuence of Pressure: | proportional to change in oxygen partial |
| pressure | |
| Infuence of Mechanical Shock: | < 1% relative after a fall from 1m |
| Operating Temperature: | 0 to 50C |
| Temperature Compensation: | built-in NTC compensation (see below) |
| Efect of Temperature | between +5 C and +25 C: 3 % relative error |
| Compensation (steady state): | between 0 C and +50 C: 8 % relative error |
| Operating Humidity: | 0-99 % RH non-condensing |
| Long Term Output Drift: | < 1 % vol oxygen per month |
| typically < - 15 % relative over lifetime | |
| Storage Temperature: | -20 to +50 C |
| Recommended Storage: | +5 to +15 C |
| Recommended Load: | 10 kOhms |
| Warm-Up Time: | < 30 minutes, after replacement of sensor |
| Weight: | approximately 28 grams |
| approximately 43 grams E61912 series |
| Manufacturer | Model |
| Deversified Diagnostics | Xenematic |
| Hamilton Medical | Aladdin, Amadeus, Heyer Pocket O2, Veolar |
| Hudson RCI | 5525, 5528, 5529, 5550, 5552 |
| Taema | KV050501, Oxy 2100 |
| Teledyne | T1, T2, TED 160, TED 190 |
