HUBEI SAFETY PROTECTIVE PRODUCTS CO.,LTD(WUHAN BRANCH) |
Verified Suppliers
|
|
Beverage Bottle PETG Shrink Sleeve Film 78% Shrinkage , 30-80mic Thickness
PETG heat shrink film
BOPET is a polyester film made from stretched polyethylene
terephthalate and used for its high tensile strength,chemical and dimensional stability,transparency,reflectivity,gas and aroma
barrier properties, and electrical insluation.
1.Equal mechanical properties in MD and TD.
2.Good temperature stablility.
3.Excellent puncture resistance.
Description
1. Rigid PETG shrink film for Shrink Sleeve Label application.
2. Oriented in Transverse Direction,High shrinkage under 80C/10sec. TD Shrinkage > 68%, MD Shrinkage < 0%, Low Shrinkage haze.
3. Recommended for using in steam shrink tunnels.
Applications
1) Full or partial body shrink sleeves;
2) Full or partial body roll sleeves;
3) Tamper-evident band;
4) Wine capsules and disk plates;
5) Pressure-sensitive shrink labels;
6) Promotion combining pack
Storage
PETG Heat shrinkable film is stored at below 30°C (86°F) with
quality guarantee period of six
months in its original packaging; Avoid damages from direct
sunlight, high moisture and falling down.
Safety Information
Non-hazardous for air, sea and road freight.
Detailed safety information is contained in each Material Safety
Data Sheet, which can be
obtained from our company.
Note
Information above is only for reference. Considering the difference
between customers in terms
of equipment, process conditions, applications and specific
requirements etc., we will be
responsible for the film property itself only instead of each using
method and requirements from
different customers.