CE FFP1 Save Mask , FFP1 Dust Mask , Disposable Mask,With Carbon
With Valve
Advantages
- Polypropylene (P.P.) outer layer provides smooth lining and avoids
loose fibres.
- Embossed fringe seal avoids fluffy open layer around the edges.
Latex-Free synthetic rubber headstrap.
- Contour design ensures the compatibility of glasses/goggles and
reduces fogging.
- Soft nose foam and adjustable nosepiece ensure custom shape and
increase the worker comfort and acceptance.
- Light wear and comfortable. Contour fit.Easy breathing/Speaking.
Clear vision. Free maintenance (disposable item).
- Better breathing provided by the exhalation valve.
- The ISO 9001 / ISO 14001 certified production guarantees the
reliability / regularity of the production and the control of the
environmental impact.
Descriptions
FFP1V Dust Mask use latex-free elastic strap , soft nose
liner , softer and fit the face,adjustable aluminum nose clip
will make wearing more sealless leakage .Easy-breathing
valve can make breathing more smooth .
Material of each layer
Outer layer is Protective needle punched cotton.The middle layde is FFP1 melt blown filter(have filter efficiency level
of 80%)
The other middle layde is Active Carbon filter.(MX-2006),and the inner layer is Shaped needle punched cotton
Mask CE Quality Standards
CE Standard for Disposable Respirators |
EN: 149:2001 + A1:2009 |
Distinguish | Filter Efficiency | Penetration | Resistant |
FFP1 NR | ≧80% | < 20% | < 21mmH2O |
FFP2 NR | ≧94% | < 5% | < 24mmH2O |
FFP3 NR | ≧99% | < 1% | < 30mmH2O |
1 . Stardard
: EN : 149 : 2001 + A1 : 2009
2 . Test
Machine : TSI 8130
3 . Test Flow :
95Liters/Min
4 . Test
Medium : NACL & DOP
Certification
This product has been tested according to the following European
Standard:
- EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering
half masks to protect against particles. Requirements, testing,
marking.It complies with European Regulation (EU) 2016/425 on Personal
Protective Equipment (PPE).Category III.
- EU type examination certificate (module B) issued by BSI , notified
body n°0086.The PPE is subject to the conformity assessment procedure based on
internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under
surveillance of BSI , notified body n°0086.
How to use?
- Cup respirator in one hand with nosepiece at fingertips,allow
headbands to hang freely below hand.
- Hold respirator under chin,with nose piece up
- Locate the upper strap across the crown of the head and the lower
strap below the ears.
- Strap must not be twisted.
- Using both hands,mould nose clip to the shape of the lower part of
the nose to ensure a close fit and good seal.Pinching the nose clip
using only one hand may result in less effective respirator
peformance.
- The seal of the respirator on the face should be fit-checked before
entering the workplace.
- If the user feels the bottom strap is too loose and it is not
possible to achieve a satisfactory fit of the mask a knot can be
tied in the strap.
![](http://img.everychina.com/nimg/9c/01/af8c0a334e9aa3813afd3e1363d8.jpg)
![](http://img.everychina.com/nimg/74/5f/647a4eae71dab99d9d324d7339f2.jpg)
Expiry date
If maintained as per storage instructions , products can be
used up to 5 years from date of manufacture.
Packing
Normal Packing 12pcs/box,240pcs/ctn