Sanitory VFD Horizontal Decanter Centrifuge Machine With Spraying Device 3600r/Min

Sanitory Long Service Life VFD Decanter Centifuge Mahine With Spraying Device

How Do Decanter Centrifuges Actually Work?
A decanter is just a sedimentation tank wrapped around an axis. Solid particles that are heavier than liquid move to the bottom of the sedimentation tank by gravity and form a sediment (solid phase) at the bottom. A wine decanter, for example, can be thought of as a sediment vessel. The solid and liquid phases of a centrifuge are separated by centrifugal acceleration. The solid particles, which have a higher density and are hence heavier than the liquid, migrate outwards in the centrifuge’s revolving bowl due to centrifugal force. The sediment forms on the inside of the centrifuge bowl’s inner wall. The separation of solid particles from liquid is more faster and more efficient in a centrifuge because centrifugal forces of roughly 3000 g are applied instead of 1 g in a gravitational field.

Description

The introduction of horizontal screw centrifuge into the fresh juice industry not only replaces the traditional filtration equipment in juice production to improve production efficiency, solid-liquid separation according to demand to improve the quality of juice itself, but also plays a positive role in the final wastewater treatment process of production to reduce the pressure of environmental protection. It can be seen that the introduction of centrifuge equipment such as horizontal screw centrifuge in the fresh juice industry is the progress of The Times and the general trend of the development of juice production industry.

The application of horizontal screw centrifuge in the fresh juice industry mainly has two aspects, one is used for solid-liquid separation in the juicing process to improve the quality, and the other is for environmental protection of wastewater treatment. It is directly involved in the production of horizontal screw centrifuge for the solid-liquid separation of juice. As mentioned above, the centrifuge equipment replaces the traditional filtration equipment such as plate frame press filter and press cloth dump bucket, which not only has high efficiency, but also has the advantages of adjustable filtration precision. It is especially suitable for the special demand of adjustable precision parameters of the fruit slag concentration in the packaging of fresh juice, which has the advantages that traditional filtration equipment does not have

As for the application of wastewater treatment centrifuge in juice beverage industry, juice beverage industry is also an industrial production field, which not only meets the characteristics of industrial wastewater with high pollutant content and difficult wastewater treatment, but also has the characteristics of industrial wastewater with high concentration of organic matter and fast deterioration and strong smell. The pollution caused by wastewater discharge in juice industry has become a prominent problem. Centrifuge and other new technology and equipment on the horse treatment of juice industry wastewater has become an urgent need.

Main technical parameter of model LW350

Application

This Decanter centrifuge is most often used for clarification of liquid containing high concentrations of solid, removing solids from liquid. This model is special used for purification of juice and dehydration of fruit fiber .

Certifications:

After service :

1. Months guarantee period from machine arriving date.

2. 24 hours technical consultation

3. Guide you do the normal maintenance.

4. Markting team will visiting if you need

FAQ:

What is the difference between two - phase separation and three - phase separation?

A: Two-phase separation horizontal screw settling centrifuge: It is composed of base, hood, main bearing, drum, screw, differential, drive system and control system. The drum and the spiral rotate at the same high speed with the differential speed, and the material enters the inner cylinder of the spiral through the feed pipe and enters the drum from the feed port. Under the action of centrifugal force, the heavy solid phase material is deposited on the wall of the drum to form a sediment layer. The spiral will continuously push the deposited solid phase material to the end of the drum cone and discharge it out of the machine through the slag discharge port. The lighter liquid material forms the inner liquid ring, which continuously spills out of the drum through the overflow port at the big end of the drum and is discharged out of the machine through the drain port.

Three-phase separation horizontal snail sedimentation centrifuge: mainly used for solid-liquid separation, that is, to separate a solid phase (the highest density) and two different densities of liquid phase. The drum and the spiral rotate at the same high speed with the differential speed, and the material enters the inner cylinder of the spiral through the feed pipe and enters the drum from the feed port. Under the action of centrifugal force, the solid phase material is deposited on the drum wall to form a sediment layer, and the two liquid phase materials form a light liquid phase ring and a heavy liquid phase ring respectively. From the drum wall to the inward, the solid phase layer, the heavy liquid phase layer and the light liquid phase layer successively. The solid material deposited on the wall of the drum is continuously pushed to the end of the drum cone and discharged out of the machine through the slag discharge port. The light liquid phase and the heavy liquid phase overflow continuously through different overflow ports at the big end of the drum. Thus achieving three-phase separation.