Active Member
|
[China]
Address: 506B,Dazhong industry park,sanhe ,DaLang street,longhua district,ShenZhen
Contact name:Admin/Abby/May/Tina//Aimee
Ours ultrasonic Co.,Ltd |
|
|
20Khz 2000w Ultrasonic Plastic Welding Machine transducer
Characteristics of ultrasonic transducer
1. LY12 alloy aluminum is used in the front pressing block, which
has the advantages of high ultrasonic transmission speed, small
negative reactance and high conversion efficiency;
2. Independent research and development of piezoelectric ceramic
chip, stable performance, high Q value, low calorific value, high
electrical conversion efficiency;
3. Pre force screw adopts national standard 12.9 high strength
material to ensure no loosening and fracture under high frequency
oscillation;
4. The electrode is made of beryllium bronze lead-free solder wire
with good conductivity;
5. Full inspection to ensure good product rate;
Use of ultrasonic welding transducer:
The ultrasonic power supply and transducer transmit the ultrasonic
energy to the welding area through the upper weldment. Due to the
large acoustic resistance at the interface between the two welding
areas, local high temperature will be produced. Due to the poor
thermal conductivity of plastic, nylon, chemical fiber, non-woven
fabric, multilayer cloth, gold cloth and other materials, they can
not disperse in time and gather in the welding area, resulting in
the rapid melting of the two contact surfaces and the fusion of
them after a certain pressure. When the ultrasonic stopped, the
pressure continued, and some holding time was allowed to solidify
and form a solid molecular chain to achieve the purpose of welding.
| Type | Full-length(mm) | Joint Bolt(mm) | Frequency(KHz) | Resonance Impedance(Ω) | Capacity(pF) | Input Power (W) |
| ARS-HJHNQ-152500 P8 | 153 | M20×1.5 | 15 | 15 | 13000 | 2500 |
| ARS-HJHNQ-152000 P8 | 167 | M20×1.5 | 15 | 10 | 9500 | 2000 |
| ARS-HJHNQ-151500 P4 | 171 | M18×1.5 | 15 | 12 | 12500 | 1500 |
| ARS-HJHNQ-151800 P4 | 118 | M20×1.5 | 20 | 15 | 15000 | 1800 |
| ARS-HJHNQ-202000 P8 | 128 | M18×1 | 20 | 10 | 11000 | 2000 |
| ARS-HJHNQ-202000 P8 | 124 | M18×1.5 | 20 | 12 | 10000 | 1500 |
| ARS-HJHNQ-20700 P8 | 112 | 1/2-20 UNF | 20 | 15 | 9000 | 700 |
| ARS-HJHNQ-20900 P8 | 133 | 1/2-20 UNF | 20 | 15 | 10000 | 900 |
| ARS-HJHNQ-20600 P8 | 121 | M18×1.5 | 20 | 15 | 6000 | 600 |
| ARS-HJHNQ-30500 P8 | 77 | M10×1.5 | 30 | 5 | 5500 | 500 |
| ARS-HJHNQ-28200 P4 | 92.1 | M10×1 | 28 | 20 | 3000 | 200 |
| ARS-HJHNQ-28100 P8 | 91 | M8×1 | 28 | 25 | 2200 | 100 |
| ARS-HJHNQ-28250 P8 | 94 | 1/2-20 UNF | 28 | 20 | 4000 | 250 |
| ARS-HJHNQ-202000 P8 | 128 | 1/2-20 UNF | 20 | 10 | 20000 | 2000 |
| ARS-HJHNQ-201500 P8 | 124 | 1/2-20 UNF | 20 | 10 | 16000 | 1500 |
| ARS-HJHNQ-201300 P8 | 128 | 1/2-20 UNF | 20 | 10 | 12500 | 1300 |
| ARS-HJHNQ-201500 P8 | 132 | 1/2-20 UNF | 20 | 10 | 11000 | 1500 |
| ARS-HJHNQ-20900 P8 | 123 | 1/2-20 UNF | 20 | 10 | 9500 | 900 |
| ARS-HJHNQ-152000 P4 | 171 | M18×1.5 | 15 | 12 | 10000 | 2000 |
| ARS-HJHNQ-35100 P8 | 71 | M8×1 | 35 | 25 | 2200 | 100 |
| ARS-HJHNQ-38100 P8 | 66 | M8×1.25 | 38 | 40 | 1200 | 100 |
| ARS-HJHNQ-38200 P4 | 65 | M8×1 | 38 | 14 | 3300 | 200 |
20Khz 2000w Ultrasonic Plastic Welding Machine transducer
