Environmentally Friendly Industrial Ultrasonic Cleaner 28KHZ 24 Hours Working Hours

28KHZ Injection Mold Ultrasonic Cleaning Machine for Removing Polypropylene Dust Oil Dirt

Model: Hardware mold cleaning machine
◆ use of cleaning solution: for the original solution of special mold cleaning solution
◆ inner groove size: l × w × H (mm) 550 × 300 × 280
◆ external dimension: l × w × H (mm) 850 × 500 × 850 (about)
◆ ultrasonic generator: a set of built-in type
◆ ultrasonic power: 900W
◆ one set of electrolytic machine: voltage 0-15v, current 0-50a, built-in electrolytic ultrasonic cleaning machine cleaning process: electrolytic ultrasonic system is composed of ultrasonic generator system, electrolytic circuit system, circulating filter system, special gold cleaning fluid and water-based rust inhibitor
◆ the electrolytic cleaning system is to send gas to the metal surface, remove the dirt and impurities on the metal surface with the effect of sauna, and also completely remove the resin composition; remove and float the dirt by ultrasonic vibration, and the metal is attached to the cathode, even the dirt in a small corner can be completely removed
◆ restore the metal to its original beauty.
◆ even complex shapes can remove dirt.
◆ it can clean and decontaminate completely and truly.
◆ good rust removal and rust prevention effect.
◆ one hour less time than manual cleaning.
◆ more environmentally friendly and safer than using organic solvents.
◆ greatly reduce the bad rate after cleaning.

28KHZ Injection Mold Ultrasonic Cleaning Machine for Removing Polypropylene Dust Oil Dirt