Active Member
|
[China]
Address: 506B,Dazhong industry park,sanhe ,DaLang street,longhua district,ShenZhen
Contact name:Admin/Abby/May/Tina//Aimee
Ours ultrasonic Co.,Ltd |
|
|
ultrasonic transducer transformer for 15khz/ 20khz ultrasonic plastic welding machine 2000W
Ultrasound welding converts 50/60 Hertz current to 15, 20, 30 or 40 through an ultrasonic generator.
KHz power. The converted high frequency electric energy is
converted into mechanical operation of the same frequency again
through transducers.
The mechanical motion is then transmitted to the welding head
through a set of amplitude-changing horn device. Welding head will
The received vibration energy is transmitted to the joint of the
workpiece to be welded, where the vibration energy is passed
through.
Friction is converted into heat to melt plastics. Ultrasound can
not only be used to weld hard thermoplastic plastics
It can also process fabrics and films. The main components of an
ultrasonic welding system include an ultrasonic generator.
Generator, transducer/horn/welding head triple set, die and frame.
Utilization of Linear Vibration Friction Welding
Friction heat generated at the interface of two workpieces to be
welded melts the plastics. Thermal energy comes from a certain
pressure.
Under this condition, a workpiece moves back and forth on another
surface with a certain displacement or amplitude. Once the
expectations are met
At the same time, a certain amount of pressure will still be
applied to the two workpieces.
Cooling and solidifying the part that has just been welded to form
a tight bond. Track Vibration Friction Welding
Welding is a method of using friction heat energy to weld. When the
track vibration friction welding is carried out, the upper part
The workpiece moves in orbit at a fixed speed - circularly in all
directions. Exercise can be produced.
Thermal energy can make the welding parts of two plastic parts
reach the melting point. Once the plastic begins to melt, the
movement stops.
The welding parts of the two workpieces will be solidified and
firmly connected. Small clamping force can lead to workpiece
Workpieces with a diameter of less than 10 inches can be rubbed by
track vibration with minimal deformation.
Welding.
| Type | Full-length(mm) | Joint Bolt(mm) | Frequency(KHz) | Resonance Impedance(Ω) | Capacity(pF) | Input Power (W) |
| ARS-HJHNQ-152500 P8 | 153 | M20×1.5 | 15 | 15 | 13000 | 2500 |
| ARS-HJHNQ-152000 P8 | 167 | M20×1.5 | 15 | 10 | 9500 | 2000 |
| ARS-HJHNQ-151500 P4 | 171 | M18×1.5 | 15 | 12 | 12500 | 1500 |
| ARS-HJHNQ-151800 P4 | 118 | M20×1.5 | 20 | 15 | 15000 | 1800 |
| ARS-HJHNQ-202000 P8 | 128 | M18×1 | 20 | 10 | 11000 | 2000 |
| ARS-HJHNQ-202000 P8 | 124 | M18×1.5 | 20 | 12 | 10000 | 1500 |
| ARS-HJHNQ-20700 P8 | 112 | 1/2-20 UNF | 20 | 15 | 9000 | 700 |
| ARS-HJHNQ-20900 P8 | 133 | 1/2-20 UNF | 20 | 15 | 10000 | 900 |
| ARS-HJHNQ-20600 P8 | 121 | M18×1.5 | 20 | 15 | 6000 | 600 |
| ARS-HJHNQ-30500 P8 | 77 | M10×1.5 | 30 | 5 | 5500 | 500 |
| ARS-HJHNQ-28200 P4 | 92.1 | M10×1 | 28 | 20 | 3000 | 200 |
| ARS-HJHNQ-28100 P8 | 91 | M8×1 | 28 | 25 | 2200 | 100 |
| ARS-HJHNQ-28250 P8 | 94 | 1/2-20 UNF | 28 | 20 | 4000 | 250 |
| ARS-HJHNQ-202000 P8 | 128 | 1/2-20 UNF | 20 | 10 | 20000 | 2000 |
| ARS-HJHNQ-201500 P8 | 124 | 1/2-20 UNF | 20 | 10 | 16000 | 1500 |
| ARS-HJHNQ-201300 P8 | 128 | 1/2-20 UNF | 20 | 10 | 12500 | 1300 |
| ARS-HJHNQ-201500 P8 | 132 | 1/2-20 UNF | 20 | 10 | 11000 | 1500 |
| ARS-HJHNQ-20900 P8 | 123 | 1/2-20 UNF | 20 | 10 | 9500 | 900 |
| ARS-HJHNQ-152000 P4 | 171 | M18×1.5 | 15 | 12 | 10000 | 2000 |
| ARS-HJHNQ-35100 P8 | 71 | M8×1 | 35 | 25 | 2200 | 100 |
| ARS-HJHNQ-38100 P8 | 66 | M8×1.25 | 38 | 40 | 1200 | 100 |
| ARS-HJHNQ-38200 P4 | 65 | M8×1 | 38 | 14 | 3300 | 200 |
ultrasonic transducer transformer for 15khz/ 20khz ultrasonic plastic welding machine 2000W
