Chinese Cheap Micro Digger Machine New Mini Excavator Bucket
Hydraulic
1. Mini excavator is smaller than a traditional excavator, What’s
more, important that is also reduced in terms of fuel consumption,
so the improvement of energy saving is the optimization of
environmental protection projects.
2. High usage rate, a wide range of use environment, and high
efficiency are also the advantages of small excavators, in the
construction team, efficiency and quality are undoubtedly in the
first place.
3. Noise pollution is also a source of pollution. Small excavators
also do a good job of reducing noise, which is conducive to
promoting the safety and efficiency of workers.
Specifications:
Specifications |
Full Vehicle Weight | 2.74T |
Rated Power | 15.2/2500kW/rpm |
Swing Speed | 10rpm |
Ground specific voltage | 30.5kPa |
Stick digging force | 14.2kN |
Overall Length | 4159mm |
Overall Height (boom tip) | 1636mm |
Track Width | 250mm |
Minimum Ground Clearance | 320mm |
Track Grounding Length | 1600mm |
Max. Digging Height | 4132mm |
Max. Digging Depth | 2485mm |
Min. Rotation Radius | 2096mm |
Bucket Capacity | 0.08m3 |
Walking Speed(Fast/Low) | 2.0/3.2km/h |
Climbing Ability | 58%/30° |
Bucket Digging Force: | 20kN |
Overall Width | 1550mm |
Overall height (top of cab) | 2560mm |
Wheel Base | 1250mm |
Tail Turning Radius | 775mm |
Track Width | 2040mm |
Max. Dumping Height | 2742mm |
Max. Digging Distance | 4610mm |
Deflection Angle (left/right): | 47°/74° |
Notices:
1. Inspection should be carried out before operation to confirm
that there are no obstacles and other personnel within the moving
range of the boom and bucket, and the operation can be started only
after sounding the alarm.
2. When digging grooves, the slopes and soil should be placed
according to the requirements of safety technical disclosure, and
it is strictly forbidden to dig under the fuselage.
3. When loading the truck, it should be carried out after the
transport vehicle is stopped, the bucket should be lowered as much
as possible, and the vehicle should not be smashed. It is strictly
forbidden for the bucket to go over the top of the cab of the car.
4. When walking, the arm should be parallel to the crawler, and the
slewing mechanism should be braked. The bucket should be 1m away
from the ground. The walking gradient shall not exceed the maximum
allowable gradient of the machine, drive downhill at a slow speed,
and it is strictly forbidden to slide in neutral gear. Turning
should not be too hasty, and padding should be reinforced when
passing through soft ground.
5. Before the operator can leave the cab, the bucket must be
dropped and the engine turned off.
6. Do not lift materials with buckets.
7. When the abnormal operation is found, it should be stopped
immediately, and the operation can be continued after
troubleshooting.
8. When the tire excavator is moving on a slope, the bucket should
be turned to the side of the high slope.
9. When using an excavator to demolish a structure, the operator
should analyze the collapse direction of the structure, and leave a
space for the structure to collapse between the excavator cab and
the demolished structure.
10. The excavator parking site should be flat and solid, and the
traveling mechanism must be braked when stopping.
Applications:
The main uses of the excavator: in road construction projects to
excavate trenches, in construction projects to excavate the
foundation, in water conservancy projects to excavate ditches,
canals, and dredging rivers, in quarries, open-pit mining, and
other projects for the stripping and excavation of ore, etc.; in
addition to gravel, coal and other loose materials can be loaded.
Operation: After replacing the working device, it can also be used
for lifting, pouring, installation, piling, ramming, and pile
pulling.
Company Brief Introduction:
Mini Excavator, Full Energy, You will become a Big Winner!
Our main hot products include Excavators, Mini Excavators, Electric
Excavators, Electric Forklifts, Road Rollers, Scissor elevator,
forklift and electric forklift together with other machinery
fields. Through these products, our Mini Excavators sell pretty
hot! Like 0.8T, 1.0T, 1.2T, 1.6T, 1.7T, 1.8T, 2.0T, 3.0T, 4T, 5T,
6T, 10T, 20T, 30T Excavators really win customer’s good likes!
And Also Scissor elevator, like 6 meter, 10 meter, 12 meter really
hot as well.
All Products have obtained ISO9001, CE, SGS, EPA and TUV
Certificated.